Abit KV8 PRO user manual Resume by Ring

Page 50

3-22	Chapter 3

[Power Off]: When power returns after an AC power failure, the system’s power remains off. You must press the Power button to power-on the system.

[Power On]: When power returns after an AC power failure, the system’s power will be powered on automatically.

[Last State]: When power returns after an AC power failure, the system will return to the state where you left off before power failure occurs. If the system’s power is off when AC power failure occurs, it will remain off when power returns. If the system’s power is on when AC power failure occurs, the system will power-on when power returns.

Wakeup by PME# of PCI:

Two options are available: Disabled or Enabled. The default setting is Disabled. When set to Enabled, any event affecting from PCI card (PME) will awaken a system that has powered down.

Resume by Ring:

Two options are available: Disabled or Enabled. The default setting is Disabled. When set to Enabled, any event affecting from Modem Ring will awaken a system that has powered down.

Wakeup by Alarm:

Two options are available: Disabled or Enabled. The default setting is Disabled. When set to Enabled, you can set the date and time at which the RTC (real-time clock) alarm awakens the system from Suspend mode.

Date (of Month) Alarm / Resume Time (hh:mm:ss):

You can set the Date (month) Alarm and Time Alarm (hh:mm:ss). Any event occurring will awaken a system that has powered down.

Cool’n’Quiet Technology:

This option enables or disables the AMD K8 cool and quiet function.

POWER ON Function:

This item selects the way you want your system to power on.

[Password]: Use a password to power on the system, select this option then press <Enter>. Enter your password. You can enter up to 5 characters. Type in exactly the same password to confirm, and then press <Enter>.

[Hot KEY]: Use any of the function keys between <F1> to <F12> to power on the system.

[Mouse Left]: Double click the mouse left button to power on the system.

[Mouse Right]: Double click the mouse right button to power on the system.

[Any KEY]: Use any keyboard keys to power on the system.

[BUTTON ONLY]: Use only the power button to power on the system.

[Keyboard 98]: Use the power-on button on the “Keyboard 98” compatible keyboard to power on the system.

KV8 Pro

Image 50

Contents KV8 Pro Copyright and Warranty Notice KV8 ProTable Of Contents Install LAN Driver Save & Exit Setup Exit Without SavingInstall Audio Driver Install VIA USB 2.0 DriverIntroduction Features & SpecificationsIntroduction On board VT6122 10/100/1000 Mb PCI Ethernet ControllerBack Panel I/O 2x USB headers 1x CD-IN, 1x AUX-IN headerLayout Diagram KV8 Pro Hardware Setup Hardware SetupInstall The Motherboard Install CPU and Heatsink Bank 2, 3 DIMM2 Install System Memory128MB ~ 1GB Total System Memory 128MB ~ 2GB User’s ManualChapter Connectors, Headers and Switches FAN Connectors Page USBPWR1 Page VCC Pdif Out Internal Audio Connectors Page Chapter Hardware Setup IDE Connectors Post Code Display Page Chapter Hardware Setup System Management Bus Headers AUDIO1 Bios Setup Bios SetupChapter ΜGuru Utility User DefineChapter Back to µGuru Utility Setup Menu Temperature MonitoringBeep Temp This item selects the warning temperature limit Voltage MonitoringFan Speed Monitoring FanEQ Control Standard Cmos Features Back to Standard Cmos Features Setup Menu Page Advanced Bios Features Hard Disk Boot PriorityPage Advanced Chipset Features Back to Advanced Chipset Features Setup Menu Dram Timing Selectable Bios Setup Integrated Peripherals OnChip IDE Device Click Enter key to enter its submenuBack to Integrated Peripherals Setup Menu Back to Integrated Peripherals Setup Menu Power Management Setup Resume by Ring Page Resources Controlled By PnP/PCI ConfigurationsBack to PnP/PCI Configurations Setup Menu PCI slot 1 shares IRQ signals with AGP slot PCI-1 PCI-2 PCI-3 PCI-4 PCI-5Set Password Load Fail-Safe DefaultsLoad Optimized Defaults Save & Exit SetupFollowing screen appears Click Next Click Yes User’s Manual Appendix A. Install VIA 4-in-1 DriverInstall VIA 4-in-1 Driver Appendix a Appendix B. Install Audio Driver Appendix B Appendix C. Install LAN Driver Appendix C Appendix D. Install VIA USB 2.0 Driver Click Yes Click OK Click Print to File KV8 Pro Click Next User’s Manual Appendix E. Install VIA Serial ATA RAID DriverInstall VIA Serial ATA RAID Driver Appendix E Appendix F. Install Abit µGuru Driver Install Abit µGuru DriverAppendix F Appendix G. Post Code Definition Award Post Code DefinitionInitialize the Apic for P6 class CPU InsteadScreen logo Initialize InitOnbaordAUDIO Set up floppy related fields in 40hardwareInitialize InitOnboardSuperIO Assign resources to all ISA PnP devicesEnable L2 cache Enable/Disable Parity Check according to Cmos setupRead HDD boot sector information for Trend Anti-Virus code Program boot up speedAC2003 Post Code Definition KV8 Pro Appendix H. Troubleshooting Need Assistance? Appendix H User’s Manual Model OS/Application Hardware Name Brand SpecificationsProblem Description KV8 Pro Motherboard Model NoAppendix I. How to Get Technical Support How to Get Technical SupportAppendix Alt.comp.hardware.homebuilt alt.comp.hardware.pc-homebuiltFax 43-1-7346713 asguard@asguard.at Thank You Abit Computer Corporation