Abit KV8 PRO user manual Chapter

Page 22

2-14	Chapter 2

(10). Floppy Disk Drive Connector

This connector supports two standard floppy disk drives via a 34-pin 34-conductor ribbon cable.

Connecting the Floppy Disk Drive Cable:

1.Install one end of the ribbon cable into the FDC1 connector. The colored edge of the ribbon cable should be aligned with pin-1 of FDC1 connector.

2.Install the other end(s) of ribbon cable into the disk drive connector(s). The colored edge of the ribbon cable should be also aligned with pin-1 of disk drive connector. The endmost connector should be attached to the drive designated as Drive A.

KV8 Pro

Image 22

Contents KV8 Pro Copyright and Warranty Notice KV8 ProTable Of Contents Install LAN Driver Save & Exit Setup Exit Without SavingInstall Audio Driver Install VIA USB 2.0 DriverIntroduction Features & SpecificationsIntroduction On board VT6122 10/100/1000 Mb PCI Ethernet ControllerBack Panel I/O 2x USB headers 1x CD-IN, 1x AUX-IN headerLayout Diagram KV8 Pro Install The Motherboard Hardware SetupHardware Setup Install CPU and Heatsink Bank 2, 3 DIMM2 Install System Memory128MB ~ 1GB Total System Memory 128MB ~ 2GB User’s ManualChapter Connectors, Headers and Switches FAN Connectors Page USBPWR1 Page VCC Pdif Out Internal Audio Connectors Page Chapter Hardware Setup IDE Connectors Post Code Display Page Chapter Hardware Setup System Management Bus Headers AUDIO1 Bios Setup Bios SetupChapter ΜGuru Utility User DefineChapter Back to µGuru Utility Setup Menu Temperature MonitoringBeep Temp This item selects the warning temperature limit Voltage MonitoringFan Speed Monitoring FanEQ Control Standard Cmos Features Back to Standard Cmos Features Setup Menu Page Advanced Bios Features Hard Disk Boot PriorityPage Advanced Chipset Features Back to Advanced Chipset Features Setup Menu Dram Timing Selectable Bios Setup Integrated Peripherals OnChip IDE Device Click Enter key to enter its submenuBack to Integrated Peripherals Setup Menu Back to Integrated Peripherals Setup Menu Power Management Setup Resume by Ring Page Back to PnP/PCI Configurations Setup Menu PnP/PCI ConfigurationsResources Controlled By PCI slot 1 shares IRQ signals with AGP slot PCI-1 PCI-2 PCI-3 PCI-4 PCI-5Set Password Load Fail-Safe DefaultsLoad Optimized Defaults Save & Exit SetupInstall VIA 4-in-1 Driver Appendix A. Install VIA 4-in-1 DriverFollowing screen appears Click Next Click Yes User’s Manual Appendix a Appendix B. Install Audio Driver Appendix B Appendix C. Install LAN Driver Appendix C Appendix D. Install VIA USB 2.0 Driver Click Yes Click OK Click Print to File KV8 Pro Install VIA Serial ATA RAID Driver Appendix E. Install VIA Serial ATA RAID DriverClick Next User’s Manual Appendix E Appendix F. Install Abit µGuru Driver Install Abit µGuru DriverAppendix F Appendix G. Post Code Definition Award Post Code DefinitionScreen logo InsteadInitialize the Apic for P6 class CPU Initialize InitOnbaordAUDIO Set up floppy related fields in 40hardwareInitialize InitOnboardSuperIO Assign resources to all ISA PnP devicesEnable L2 cache Enable/Disable Parity Check according to Cmos setupRead HDD boot sector information for Trend Anti-Virus code Program boot up speedAC2003 Post Code Definition KV8 Pro Appendix H. Troubleshooting Need Assistance? Appendix H User’s Manual Model OS/Application Hardware Name Brand SpecificationsProblem Description KV8 Pro Motherboard Model NoAppendix I. How to Get Technical Support How to Get Technical SupportAppendix Alt.comp.hardware.homebuilt alt.comp.hardware.pc-homebuiltFax 43-1-7346713 asguard@asguard.at Thank You Abit Computer Corporation