Abit KV8 PRO user manual Power Management Setup

Page 49

BIOS Setup	3-21

3-6. Power Management Setup

ACPI Suspend Type:

This item selects the type of Suspend mode.

[S1(PowerOn-Suspend)]: Enables the Power On Suspend function.

[S3(Suspend-To-RAM)]: Enables the Suspend to RAM function.

Run VGABIOS if S3 Resume:

Three options are available: Auto Yes No. The default setting is Auto. This item can let you choose when S3 resume active, the VGA BIOS need to be initiative or not.

Resume by OnChip USB:

Two options are available: Disabled or Enabled. The default setting is Disabled. When set to Enabled, any event affecting from onchip USB will awaken a system that has powered down. This item can be configured only if the item “ACPI Suspend Type” is set to [S3(STR)].

Power Button Function:

This item selects the method of powering off your system:

[Delay 4 Sec.]: Pushing the power button for more than 4 seconds will power off the system. This will prevent the system from powering off in case you accidentally hit or pushed the power button.

[Instant-Off]: Pressing and then releasing the power button at once will immediately power off the system.

CPU THRM-Throttling:

This item controls the CPU speed by cutting down its regular power to a percentage during the STR (Suspend To RAM) state.

Restore On AC Power Loss:

This item selects the system action after an AC power failure.

User’s Manual

Image 49

Contents KV8 Pro KV8 Pro Copyright and Warranty NoticeTable Of Contents Install Audio Driver Save & Exit Setup Exit Without SavingInstall LAN Driver Install VIA USB 2.0 DriverIntroduction Features & SpecificationsIntroduction On board VT6122 10/100/1000 Mb PCI Ethernet Controller2x USB headers 1x CD-IN, 1x AUX-IN header Back Panel I/OLayout Diagram KV8 Pro Install The Motherboard Hardware SetupHardware Setup Install CPU and Heatsink 128MB ~ 1GB Install System MemoryBank 2, 3 DIMM2 Total System Memory 128MB ~ 2GB User’s ManualChapter Connectors, Headers and Switches FAN Connectors Page USBPWR1 Page VCC Pdif Out Internal Audio Connectors Page Chapter Hardware Setup IDE Connectors Post Code Display Page Chapter Hardware Setup System Management Bus Headers AUDIO1 Bios Setup Bios SetupChapter User Define ΜGuru UtilityChapter Temperature Monitoring Back to µGuru Utility Setup MenuVoltage Monitoring Beep Temp This item selects the warning temperature limitFan Speed Monitoring FanEQ Control Standard Cmos Features Back to Standard Cmos Features Setup Menu Page Hard Disk Boot Priority Advanced Bios FeaturesPage Advanced Chipset Features Back to Advanced Chipset Features Setup Menu Dram Timing Selectable Bios Setup OnChip IDE Device Click Enter key to enter its submenu Integrated PeripheralsBack to Integrated Peripherals Setup Menu Back to Integrated Peripherals Setup Menu Power Management Setup Resume by Ring Page Back to PnP/PCI Configurations Setup Menu PnP/PCI ConfigurationsResources Controlled By PCI-1 PCI-2 PCI-3 PCI-4 PCI-5 PCI slot 1 shares IRQ signals with AGP slotLoad Optimized Defaults Load Fail-Safe DefaultsSet Password Save & Exit SetupInstall VIA 4-in-1 Driver Appendix A. Install VIA 4-in-1 DriverFollowing screen appears Click Next Click Yes User’s Manual Appendix a Appendix B. Install Audio Driver Appendix B Appendix C. Install LAN Driver Appendix C Appendix D. Install VIA USB 2.0 Driver Click Yes Click OK Click Print to File KV8 Pro Install VIA Serial ATA RAID Driver Appendix E. Install VIA Serial ATA RAID DriverClick Next User’s Manual Appendix E Install Abit µGuru Driver Appendix F. Install Abit µGuru DriverAppendix F Award Post Code Definition Appendix G. Post Code DefinitionScreen logo InsteadInitialize the Apic for P6 class CPU Initialize InitOnboardSuperIO Set up floppy related fields in 40hardwareInitialize InitOnbaordAUDIO Assign resources to all ISA PnP devicesRead HDD boot sector information for Trend Anti-Virus code Enable/Disable Parity Check according to Cmos setupEnable L2 cache Program boot up speedAC2003 Post Code Definition KV8 Pro Appendix H. Troubleshooting Need Assistance? Appendix H User’s Manual Problem Description KV8 Pro OS/Application Hardware Name Brand SpecificationsModel Motherboard Model NoHow to Get Technical Support Appendix I. How to Get Technical SupportAlt.comp.hardware.homebuilt alt.comp.hardware.pc-homebuilt AppendixFax 43-1-7346713 asguard@asguard.at Thank You Abit Computer Corporation