BIOS Setup | |
|
|
AGP Fast Write:
Two options are available: Disabled Enabled. The default setting is Enabled. If your AGP adapter can support this function, then you can choose Enabled. Otherwise, choose Disabled.
AGP Master 1 WS Write:
Two options are available: Disabled Enabled. The default setting is Disabled. This implements a single delay when writing to the AGP Bus. When you set it to Enabled,
AGP Master 1 WS Read:
Two options are available: Disabled Enabled. The default setting is Disabled. This implements a single delay when reading to the AGP Bus. When you set it to Enabled,
AGP 3.0 Calibration cycle:
Leave this item to its default setting.
DBI Output for AGP Trans.:
Leave this item to its default setting.
Back to Advanced Chipset Features Setup Menu:
DRAM Configuration:
Click <Enter> key to enter its submenu:
Current FSB Frequency:
This item will show you the current system front side bus speed.
Current DRAM Frequency:
This item will show you the current DRAM bus speed.
User’s Manual