Hand Held Products IT4800, IT4X80, IT4600, IT4710, IT4410 manual

Page 11
In Screening modes, this parameter is reported as "Useful Row Height is Too Short (1.5X)" when that is the case.

Dif Useful Height >= 1.0 X, else F otherwise

In Screening modes, this parameter is reported as "Useful Row Height is Too Short (1.5X)" when that is the case.

{7} lists the Data Safety Margin, which is the ratio of the unused error correc- tion words to the recommended (!) number of such words. Data Safety Mar- gin can exceed 100%, when the ECL is higher than the minimum recommended, or be limited to 50% or lower, even with perfect printing, when the ECL is below minimum. The grade is assigned as:

Aif Safety Margin >= 62%, else

Bif Safety Margin >= 50%, else

Cif Safety Margin >= 37%, else

Dif Safety Margin >= 25%, else

Fotherwise

In Screening modes, this parameter is reported as "Low Data Safety Margin (44%)" when that is the case.

{8} lists the Edge Accuracy measured in the Start or Stop patterns. The grade is assigned as:

Aif Edge Accuracy >= 62%, else

Bif Edge Accuracy >= 50%, else

Cif Edge Accuracy >= 37%, else

Dif Edge Accuracy >= 25%, else

Fotherwise

In Screening modes, this parameter is reported as "Poor Edge Accuracy (59%)" when that is the case.

{9} lists the Print Growth measured in the Start or Stop patterns (the growth of the dark modules or "bars"). The grade is assigned as:

Aif Print Growth is between +/- 20%, else

Bif Print Growth is between +/- 30%, else

Cif Print Growth is between +/- 40%, else

Dif Print Growth is between +/- 50%, else

Fotherwise

In Screening modes, this parameter is reported as "Excessive Print Growth (33%)" or "Excessive Print Shrinkage (-43%)" when those are the cases.

1 - 7

Image 11
Contents Quick Check 2D Print Quality Assessment User’s GuideDisclaimer Table of Contents Chapter 1 - IntroductionX-dimension Chapter 2 - Quick*ViewChapter 3 - Customer Support SymbologyReading Techniques IntroductionUser Operation Symbology/Parameter Specifics Screening Report 2D PQA ReportingFull Report PDF417 11 rows x 3 cols, 25 data & 8 chks ECL = 2 X roughly = Identifying Symbol ContentThis is a representative PDF417 symbol PQA from HHP A Data Safety Margin = 100% 0 Erasures & 0 ErrorsExcessive Print Shrinkage -43% of 2D Stacked / Multi-rowPDF417 where In Screening modes, this parameter is reported as Useful Row Height is Too Short 1.5X when that is the case 1 is the Encoded Message MicroPDF417Aztec Code 2D Matrix3 DATA MATRIX ECC200 24 x 24 modules in size Data Matrix1 This is a representative Data Matrix symbol 2 PQA from HHP 6 A Fixed Patterns 0 module errors1 This is a representative QR Code symbol 2 PQA from HHP QR Code7 A Data Safety Margin = 100% 4 lists this symbols Mask Pattern and Error Correction Level MaxiCodePostnet and Planet Code Postal Height-Modulated Bar Code Symbologies7 A Ok Bar Widths = 0.022 in 8 A Ok Inter-Bar Gaps = 0.023 in 4 Bar Sequence ADHTATDAHDDAADADAADTHTADHHDATHTADH 4-State Codes1 B15AJ6T 2 PQA from HHP 3 4-STATEBritish 34 Bars, nominally from 38.5 to 42.3 mm. in WidthTable 1 Dimensional Tolerances for the Various 4-State Bar Parameter InterpretationAverage Bar/Gap Width Average Bar Height/Extension HeightCodeword Yield Data Safety MarginBar Sequence Codeword Data and CheckEncoded Message Error Correction/Error Correction CharactersError Correction Level ECL Error Detection/Error Detection CharactersRow Height Module ErrorsSymbology Print Growth Horizontal and VerticalX-dimension Quick*View Demonstration Software Instructions Installing Quick*View from the WebSetting Up the Imager and the Quick*View Software Quick*ViewIT4410/4710 Temporary Quick*View ConfigurationIT4600/4800/4X80 If Communication Cannot Be Established Using the Quick*View SoftwareScan Data Window Latin America Obtaining Factory ServiceCustomer Support North AmericaAsia Technical AssistanceNorth America/Canada Page QC2DPQA-UG Rev B