Hand Held Products IT4600 Using the Quick*View Software, If Communication Cannot Be Established

Page 27
Using the Quick*View Software

Using the Quick*View Software

Upon startup, the Quick*View splash screen appears for approximately three seconds. Quick*View will then attempt to establish communications with the Imager.

If Communication Cannot Be Established

This message appears if communication cannot be established:

Quick*View defaults to com 1 as the communications port. If you have plugged the Imager into another com port, you must Cancel out of this message.

Click on File - Preferences. This popup appears:

Click on the radio button for the appropriate com port, then click on OK. Quick*View should now be able to locate the Imager.

You may also need to pull the Imager’s trigger to establish communications between the PC and the Imager.

If you want Quick*View to search for the Imager and establish communication, click on Device - Auto Baud Detect.

2 - 3

Image 27
Contents Quick Check 2D Print Quality Assessment User’s GuideDisclaimer Table of Contents Chapter 1 - IntroductionX-dimension Chapter 2 - Quick*ViewChapter 3 - Customer Support SymbologyIntroduction User OperationReading Techniques Symbology/Parameter Specifics 2D PQA Reporting Full ReportScreening Report PDF417 11 rows x 3 cols, 25 data & 8 chks ECL = 2 X roughly = Identifying Symbol ContentThis is a representative PDF417 symbol PQA from HHP A Data Safety Margin = 100% 0 Erasures & 0 Errors2D Stacked / Multi-row PDF417Excessive Print Shrinkage -43% of where In Screening modes, this parameter is reported as Useful Row Height is Too Short 1.5X when that is the case 1 is the Encoded Message MicroPDF417Aztec Code 2D Matrix3 DATA MATRIX ECC200 24 x 24 modules in size Data Matrix1 This is a representative Data Matrix symbol 2 PQA from HHP 6 A Fixed Patterns 0 module errorsQR Code 7 A Data Safety Margin = 100%1 This is a representative QR Code symbol 2 PQA from HHP 4 lists this symbols Mask Pattern and Error Correction Level MaxiCodePostnet and Planet Code Postal Height-Modulated Bar Code Symbologies7 A Ok Bar Widths = 0.022 in 8 A Ok Inter-Bar Gaps = 0.023 in 4 Bar Sequence ADHTATDAHDDAADADAADTHTADHHDATHTADH 4-State Codes1 B15AJ6T 2 PQA from HHP 3 4-STATEBritish 34 Bars, nominally from 38.5 to 42.3 mm. in WidthTable 1 Dimensional Tolerances for the Various 4-State Bar Parameter InterpretationAverage Bar/Gap Width Average Bar Height/Extension HeightCodeword Yield Data Safety MarginBar Sequence Codeword Data and CheckEncoded Message Error Correction/Error Correction CharactersError Correction Level ECL Error Detection/Error Detection CharactersRow Height Module ErrorsSymbology Print Growth Horizontal and VerticalX-dimension Quick*View Demonstration Software Instructions Installing Quick*View from the WebSetting Up the Imager and the Quick*View Software Quick*ViewTemporary Quick*View Configuration IT4600/4800/4X80IT4410/4710 If Communication Cannot Be Established Using the Quick*View SoftwareScan Data Window Latin America Obtaining Factory ServiceCustomer Support North AmericaTechnical Assistance North America/CanadaAsia Page QC2DPQA-UG Rev B