Hand Held Products IT4X80, IT4800, IT4600 manual Quick*View Demonstration Software Instructions

Page 25
Quick*View

2

Quick*View

Quick*View Demonstration Software Instructions

Quick*View is a Microsoft Windows® program that displays decoded symbol messages and captures images (for instance, ID photographs) from the imager. Bar code information and images are displayed in the Quick*View window.

Note: For additional information about Quick*View, please refer to the user’s guide for your imager.

Setting Up the Imager and the Quick*View Software

1.Connect the Imager to the PC’s com port (com port 1 or com port 2) via the appropriate interface cable (refer to the user’s guide for your imager). Con- nect the appropriate power supply to the Imager. (The Imager cannot get its power from the PC’s com port.)

2.Insert the SDK CD. Load Quick*View from the CD.

For Microsoft Windows 95 or NT 4.0

3.Insert the Quick*View diskette labelled “32 Bit Release” into Drive A or B.

4.From the Start Menu, click on Run. Type “x:\setup” in the command line box, where “x” represents a drive letter, typically “A” for the 3.5" floppy drive on most PCs. Click on OK.

5.Follow the instructions in the setup screens.

6.To start the Quick*View program, from the Start Menu click on Programs, Quickview, QuickView (32 Bit).

Installing Quick*View from the Web

1.Access the HHP web site at www.hhp.com.

2.Click in the Quick Search text box and enter Quick*View.

3.Click on Search Now.

4.Click on the entry for Quick*View.

5.When prompted, select Save File, and save the files to the c:\win- dows\temp directory.

6.Once you have finished downloading the file, exit the web site.

7.Using Explorer, go to the c:\windows\temp file.

2 - 1

Image 25
Contents Quick Check 2D Print Quality Assessment User’s GuideDisclaimer Table of Contents Chapter 1 - IntroductionChapter 3 - Customer Support Chapter 2 - Quick*ViewSymbology X-dimensionUser Operation IntroductionReading Techniques Symbology/Parameter Specifics Full Report 2D PQA ReportingScreening Report This is a representative PDF417 symbol PQA from HHP Identifying Symbol ContentA Data Safety Margin = 100% 0 Erasures & 0 Errors PDF417 11 rows x 3 cols, 25 data & 8 chks ECL = 2 X roughly =PDF417 2D Stacked / Multi-rowExcessive Print Shrinkage -43% of where In Screening modes, this parameter is reported as Useful Row Height is Too Short 1.5X when that is the case 1 is the Encoded Message MicroPDF417Aztec Code 2D Matrix1 This is a representative Data Matrix symbol 2 PQA from HHP Data Matrix6 A Fixed Patterns 0 module errors 3 DATA MATRIX ECC200 24 x 24 modules in size7 A Data Safety Margin = 100% QR Code1 This is a representative QR Code symbol 2 PQA from HHP 4 lists this symbols Mask Pattern and Error Correction Level MaxiCodePostnet and Planet Code Postal Height-Modulated Bar Code Symbologies7 A Ok Bar Widths = 0.022 in 8 A Ok Inter-Bar Gaps = 0.023 in 1 B15AJ6T 2 PQA from HHP 4-State Codes3 4-STATEBritish 34 Bars, nominally from 38.5 to 42.3 mm. in Width 4 Bar Sequence ADHTATDAHDDAADADAADTHTADHHDATHTADHAverage Bar/Gap Width Parameter InterpretationAverage Bar Height/Extension Height Table 1 Dimensional Tolerances for the Various 4-State BarBar Sequence Data Safety MarginCodeword Data and Check Codeword YieldError Correction Level ECL Error Correction/Error Correction CharactersError Detection/Error Detection Characters Encoded MessageSymbology Module ErrorsPrint Growth Horizontal and Vertical Row HeightX-dimension Setting Up the Imager and the Quick*View Software Installing Quick*View from the WebQuick*View Quick*View Demonstration Software InstructionsIT4600/4800/4X80 Temporary Quick*View ConfigurationIT4410/4710 If Communication Cannot Be Established Using the Quick*View SoftwareScan Data Window Customer Support Obtaining Factory ServiceNorth America Latin AmericaNorth America/Canada Technical AssistanceAsia Page QC2DPQA-UG Rev B