Screen II
Editing the scramble map:
1.Function Key F7 allows setting the router level on which the scramble map is to operate. ESC exits this edit mode.
2.Function key F2 loads the scramble map currently active in the router controller RAM.
3.Function Key F3 loads a scramble map previously saved to disk.
4.Function key F8 invokes the scramble map editor.
5.Function key F4 downloads the edited scramble map, along with the configurationinformation entered in screen I, to the router.
6.Function key F5 loads the edited scramble map, along with the configuration information from Screen I, to disk. Prompt is for a file name. The default
·The scramble map operates on up to 256 addresses. The ranges of addresses available to a given map begin at the points defined in Screen I.
·Initially, undefined map fields within the configured partition range will consist of
·Keyboard arrow keys guide the editor through the fields. The enter key accepts the keyed in data.
·Two physical inputs can be a mapped to a single input controller address, and two physical outputs can be mapped to a single output controller address. This allows pairs of connections to be made with a single take. However:
Physical input ports may be assigned to multiple controller addresses. Physical output ports may only assigned to a single controller address.
Because of this restriction, output port entries must be nulled or re- assigned before they can be
·Some control systems begin their addressing with 0. The NVision routers begin their physical addressing at 1.
·The ESC key ends the edit session.
NV3128 |