Efficient Networks 5500 Series manual User Setup System Login, To change the user name or password

Page 30

SpeedStream Router User Guide

5.Enter the domain name. This information may be provided by your ISP.

6.Enter the lease time, in minutes, to specify the amount of time that a DHCP lease should be provided the host (requires that you specify a DNS IP address).

- or –

Select Infinite time to hold the lease until you go back in and change these settings.

7.To apply the data you entered, click Save Settings. A confirmation screen displays.

User Setup (System Login)

After you have initially set your user name and password, the System Status screen will display the next time you log on to the Web interface. To change the system user name and/or password, you must open the Administrative User Setup screen from the main menu.

To change the user name or password:

1.From the main menu, click User Setup.

The Administrative User Setup screen displays.

2.If you Want to change the user name, enter the new name in the User Name box.

3.Enter the new password in both the New Password and Confirm New Password boxes.

4.Select the login security level you prefer:

Require admin login to access entire Web site:

Before you can access any screen in the Web interface, you must log in with your network user name and password. (Security level = High)

Require admin login to access configuration pages:

Before you can access any screen in the Web interface that allows you to make configuration changes, you must log in with your network user name and password. (Security level = Medium)

Do not require admin login:

After you log in for the first time, you will not be required to log in again at any screen. (Security level = Low)

5.Click OK.

The System Status screen displays.

(For more information, visit the ICSA site at http://www.icsalabs.com)

22

Image 30
Contents Router User Guide Software License General Provisions Contents Viewing Status Screens Iii List of Illustrations 51-57SpeedStream Router User Guide Introduction Hardware DescriptionFeatures and Benefits About the SpeedStream RouterGeneral Safety Guidelines Firewall SecuritySession Tracking Basic Installation Procedure Installing the RouterHardware Installation Minimum System RequirementsInstalling Line Filters Recording System SettingsIn-Line Filter Connecting the Cables Wall-Mount FilterTwo-to-One Adapter Ethernet Installation Method USB Installation Method Configuring Computer Network Settings Windows 95 / 98 / METCP/IP Properties dialog box displays TCP/IP Properties dialog box, click the IP Address tab Windows NT Windows Double-clickNetwork and Dial-up ConnectionsWindows XP Level Getting StartedNavigating the Web Interface SnoozeScreen Navigation Elements IP Filter RulesLog Logging On to the Web Interface To log on to the Web interface for the first timeEntering the Network Password Logging On to a PPP SessionAccess Concentrator Service NameClick Save Settings Customizing Router SettingsTo specify the host configuration settings HostDhcp Configuration Options To specify the Dhcp configuration settings User Setup System Login To change the user name or passwordTime Client Time Client Configuration OptionsTo configure the Time Client Static RoutesTo enable NAT and specify a destination IP address To access the NAT/NAPT Configuration screenTo disable NAT and Napt NAT/NAPT ServerPort Forwarding Configuration Options To enable NaptPort Forwarding To delete all entries in the table To edit an existing port forwarding configurationTo delete an existing entry To add a port forwarding entryFirewall Firewall Security LevelsDMZ Settings DMZ Configuration OptionsFirewall Snooze Control To enable DMZ and specify an accessible computer Custom IP Filter Rules To disable DMZOn the Firewall DMZ Configuration screen, click Disable DMZ Cloning a Rule DefinitionCreating Custom IP Filter Rules Firewall Simple Setup screenCustom IP Filter Configuration Fill in the following informationSpecify Source Port Operator options Select a protocol to filterIf TCP/UDP chosen in , select the desired rule options Specify Destination Port Operator optionsBackground Types of AttackADS Configuration Options To save the new settings To enable ADSSelect Enable Attack Detection To filter, or drop, a packet typeRFC2684 Configuration Options To configure RFC2684 settingsRFC2684 To configure UPnP settings Bridge ModeUPnP Configuration Options UPnP Universal Plug and PlayRIP Configuration Options To enable bridge modeRIP Routing Information Protocol To configure RIP settings LAN ServersSystem Log Reboot System Log Configuration OptionsTo configure the System Log To reset the router ResetFirmware Update To update the router firmwareDiagnostics To cancel the resetClick Run Diagnostics at the bottom of the screen Viewing Status Screens System SummaryTo display the Interface Map Interface MapFirewall Log Interface Map Interface Map screen displaysATM/AAL Status/Statistics To update the displayStatus and Statistics Screens To display the System Log screenDSL Status/Statistics Ethernet Status/StatisticsUSB Status/Statistics RoutesTroubleshooting Basic Troubleshooting StepsInterpreting the LED Display Resolving Specific Issues Pwr LED Not LitContacting Technical Support Configuration Data Sheets Administrative User SetupAttack Detection System Firewall Custom IP Filter Configuration Firewall DMZ Firewall Level Firewall Snooze ControlPPP Login RIP Static RouteUPnP Technical Specifications Firewall Security Levels ProtocolNeed for Speed VNC Acronyms and Technical Concepts AcronymsOctet Rx ErrorsMAC address PPPoETechnical Concepts Dhcp Dynamic Host Configuration Protocol Icsa 3.0a-compliancy PPP Point-to-Point Protocol Index Data Sheets See Configuration Data Sheets PPP Network TCP