Efficient Networks 5200 Series, 5500 Series, 5400 Series manual Icsa 3.0a-compliancy

Page 74

SpeedStream Router User Guide

Note You have the option to change the router’s Ethernet IP address without rebooting the router. If you have configured a specific set of IP addresses for the DHCP server, then you change the Ethernet IP address to something that is on a different subnet than your DHCP server’s addresses, and you do not reboot, the router will not recognize the change. The DHCP server will not be able to hand out addresses. Be sure to reboot the router when you change the Ethernet IP address in this manner.

DNS (Domain Name Service)

The router supports Domain Name Service (DNS) which provides hostname-to-IP address resolution for LAN-side clients. There are two distinct DNS functions provided by the router: the DNS resolver and the DNS server.

DNS Resolver

The DNS resolver is the entity that creates a DNS request for transmission to a DNS server (which may be co-located in the router or be an external DNS server). The DNS resolver is only used by certain user interface commands that allow a hostname argument as well as an IP address argument.

The DNS resolver requires the user to configure a single DNS server IP address to which to direct DNS requests. This IP address may be the router itself in the situation where the DNS server is enabled on the router or it may be any reachable IP address at which a DNS server is available.

DNS Server

The DNS server is the entity that responds to DNS requests. The DNS server provides IP address-to- hostname resolution and hostname-to-IP address resolution for LAN clients via DNS requests. The DNS server also supports hostname-to-IP address resolution for user interface commands where appropriate in response to requests submitted by the DNS resolver.

The DNS server is enabled by default from the factory and provides the router with the default hostname ENI-Router”.

DSL (Digital Subscriber Line)

DSL describes a family of digital services provided by local telephone companies to local subscribers. There are many forms of DSL: Asymmetric DSL (DSL), Symmetric (or single pair) DSL (SDSL), and many others. The router supports DSL, which provides rates of up to 6 Mbps downstream from the customer and up to 640 Kbps upstream from the customer. DSL can carry voice and data signals at the same time in both directions.

Encapsulation Methods: PPP and RFC 1483

The 5600 series router transmits data via ATM Virtual Channels (VCs). The data is encapsulated using methods Point-to-Point Protocol (PPP) or RFC 1483 encapsulation. A brief explanation of these two encapsulation methods follows.

ICSA 3.0a-compliancy

ICSA Labs, a division of TruSecure Corporation, tests and defines firewall security criteria, providing certification to products that meet their exacting standards. For more information, go to http://www.icsalabs.com/html/communities/firewalls/index.shtml.

66

Image 74
Contents Router User Guide Software License General Provisions Contents Viewing Status Screens Iii List of Illustrations 51-57SpeedStream Router User Guide Introduction Hardware DescriptionFeatures and Benefits About the SpeedStream RouterSession Tracking General Safety GuidelinesFirewall Security Basic Installation Procedure Installing the RouterHardware Installation Minimum System RequirementsIn-Line Filter Installing Line FiltersRecording System Settings Two-to-One Adapter Connecting the CablesWall-Mount Filter Ethernet Installation Method USB Installation Method TCP/IP Properties dialog box displays Configuring Computer Network SettingsWindows 95 / 98 / ME TCP/IP Properties dialog box, click the IP Address tab Windows NT Windows Double-clickNetwork and Dial-up ConnectionsWindows XP Level Getting StartedNavigating the Web Interface SnoozeLog Screen Navigation ElementsIP Filter Rules Logging On to the Web Interface To log on to the Web interface for the first timeEntering the Network Password Logging On to a PPP SessionAccess Concentrator Service NameClick Save Settings Customizing Router SettingsTo specify the host configuration settings HostDhcp Configuration Options To specify the Dhcp configuration settings User Setup System Login To change the user name or passwordTime Client Time Client Configuration OptionsTo configure the Time Client Static RoutesTo enable NAT and specify a destination IP address To access the NAT/NAPT Configuration screenTo disable NAT and Napt NAT/NAPT ServerPort Forwarding Port Forwarding Configuration OptionsTo enable Napt To delete all entries in the table To edit an existing port forwarding configurationTo delete an existing entry To add a port forwarding entryFirewall Firewall Security LevelsFirewall Snooze Control DMZ SettingsDMZ Configuration Options To enable DMZ and specify an accessible computer Custom IP Filter Rules To disable DMZOn the Firewall DMZ Configuration screen, click Disable DMZ Cloning a Rule DefinitionCreating Custom IP Filter Rules Firewall Simple Setup screenCustom IP Filter Configuration Fill in the following informationSpecify Source Port Operator options Select a protocol to filterIf TCP/UDP chosen in , select the desired rule options Specify Destination Port Operator optionsBackground Types of AttackADS Configuration Options To save the new settings To enable ADSSelect Enable Attack Detection To filter, or drop, a packet typeRFC2684 RFC2684 Configuration OptionsTo configure RFC2684 settings To configure UPnP settings Bridge ModeUPnP Configuration Options UPnP Universal Plug and PlayRIP Routing Information Protocol RIP Configuration OptionsTo enable bridge mode System Log To configure RIP settingsLAN Servers To configure the System Log RebootSystem Log Configuration Options To reset the router ResetFirmware Update To update the router firmwareClick Run Diagnostics at the bottom of the screen DiagnosticsTo cancel the reset Viewing Status Screens System SummaryTo display the Interface Map Interface MapFirewall Log Interface Map Interface Map screen displaysATM/AAL Status/Statistics To update the displayStatus and Statistics Screens To display the System Log screenDSL Status/Statistics Ethernet Status/StatisticsUSB Status/Statistics RoutesInterpreting the LED Display TroubleshootingBasic Troubleshooting Steps Resolving Specific Issues Pwr LED Not LitContacting Technical Support Attack Detection System Configuration Data SheetsAdministrative User Setup Firewall Custom IP Filter Configuration Firewall DMZ Firewall Level Firewall Snooze ControlPPP Login RIP Static RouteUPnP Technical Specifications Firewall Security Levels ProtocolNeed for Speed VNC Acronyms and Technical Concepts AcronymsOctet Rx ErrorsMAC address PPPoETechnical Concepts Dhcp Dynamic Host Configuration Protocol Icsa 3.0a-compliancy PPP Point-to-Point Protocol Index Data Sheets See Configuration Data Sheets PPP Network TCP