Dell D08S owner manual Video

Page 38

Option

Description

 

 

 

part of the SMART (Self Monitoring Analysis and Reporting

 

Technology) specification.

 

• Enable SMART Reporting - This option is disabled by

 

default.

USB Configuration

Allows you to enable or disable the internal USB configuration.

 

The options are:

 

• Enable Boot Support

 

• Enable Front USB Ports

 

• Enable USB 3.0 Ports

 

• Enable Rear Dual USB 2.0 Ports

 

• Enable Dual USB 2.0 Ports (Under LAN ports)

Audio

Allows you enable or disable the audio feature.

 

Default Setting: Audio is enabled

Table 4. Video

 

 

 

Option

Description

 

 

Multi-Display

Allows you to enables or disables Multi-

 

Display, it should be enabled for

 

windows 7 32/64bit or later only.

 

• Disable Multi Display

Table 5. Security

Option

Description

 

 

Admin Password

This field lets you set, change, or delete the administrator (admin) password

 

(sometimes called the setup password). The admin password enables several

 

security features.

 

The drive does not have a password set by default.

 

• Enter the old password

 

• Enter the new password

 

• Confirm the new password

System Password

This field lets you set, change, or delete the system password. The system

 

password enables several security features.

 

The drive does not have a password set by default.

 

• Enter the old password

 

• Enter the new password

 

• Confirm the new password

Internal HDD_0

Allows you to set, change, or delete the password on the computer’s internal

Password

hard disk drive (HDD) Successful change to this password take effect

 

immediately. The drive does not have a password set by default

 

• Enter the old password

38

Image 38
Contents Regulatory Model D08S Regulatory Type D08S001 Page Contents Diagnostics Working on Your Computer Before Working Inside Your ComputerTurning Off Your Computer After Working Inside Your ComputerPage Page System Overview Removing and Installing ComponentsRecommended Tools Removing the Cover Installing the Cover Removing The Expansion Card Installing the Front BezelRemoving the Front Bezel Page Installing The Expansion Card Removing the Optical DriveInstalling the Optical Drive Removing the Drive CageInstalling the Drive Cage Removing the Hard Drive Installing the Hard Drive Removing the SpeakerInstalling the Speaker Memory Module GuidelinesRemoving the System Fan Installing the MemoryRemoving the Memory Installing the System Fan Removing the Power SwitchInstalling the Power Switch Removing the I/O Panel Installing the I/O Panel Removing the Power SupplyPage Page Installing the Power Supply Removing the Coin-Cell BatteryInstalling the Coin-Cell Battery Removing the Heatsink AssemblyInstalling the Heatsink Assembly Removing the ProcessorInstalling the Intrusion Switch Installing the ProcessorRemoving the Intrusion Switch System Board Components Removing the System Board Page Installing the System Board Navigation Keys System SetupBoot Sequence System Setup Options COM1 Video Computrace Service from Absolute Software KEK Performance Post Behavior When Lookup Method is set to Static IP Updating the Bios Clearing Cmos Clearing Forgotten PasswordSystem and Setup Password Assigning a System Password and Setup Password Disabling a System Password Page Diagnostics Enhanced Pre-Boot System Assessment ePSA DiagnosticsPage Troubleshooting Your Computer Power LED DiagnosticsError Messages Beep CodePage DIMM1 Page Page Technical Specifications Communications Power Page Contacting Dell