Dell D08S owner manual Post Behavior

Option	Description
	• Enabled in S5 only
	• Enabled in S4 and S5 Enabled
Fan Speed Control	Controls the speed of the system fan. This option is disabled by default.
	NOTE: When enabled, the fan runs at full speed.
USB Wake Support	This option allows you to enable USB devices to wake the computer from
	standby.
	• Enable USB Wake Support - This option is enabled by default.
Wake on LAN	This option allows the computer to power up from the off state when triggered
	by a special LAN signal. Wake-up from the Standby state is unaffected by this
	setting and must be enabled in the operating system. This feature only works
	when the computer is connected to AC power supply. The options differ based
	on the form factor.
	• Disabled - Does not allow the system to power on by special LAN signals
	when it receives a wake-up signal from the LAN or wireless LAN.
	• LAN Only - Allows the system to be powered on by special LAN signals.
	• LAN or PXE Boot - Allows the system to be powered on by special LAN or
	PXE Bootsignals. (For Ultra Small Form Factor only)
	This option is Disabled by default.
Block Sleep	Allows you to block entering to sleep (S3 state) in OS Environment.
	Default Setting: Disabled
Intel Smart Connect	The option is disabled by default. If option enables will periodically sense
Technology	nearby wireless connection while the system is asleep. It will synchronize
	emails or social media application that were open when system entered the
	sleep state.
	• Smart Connection

Table 9. POST Behavior

Option	Description
Numlock LED	Specifies if the NumLock function can be enabled when the system boots. This
	option is enabled by default.
Keyboard Errors	Specifies whether keyboard related errors are reported when it boots. This
	option is enabled by default.

Table 10. Virtualization Support

Option	Description
Virtualization	This option specifies whether a Virtual Machine Monitor (VMM) can utilize the
	additional hardware capabilities provided by Intel Virtualization technology.
	• Enable Intel Virtualization Technology - This option is enabled by default.

42