Dell D08S owner manual Computrace Service from Absolute Software

OptionDescription

• Enter the new password

• Confirm the new password

Strong Password	Enable strong password - This option is disabled by default.
Password	This field controls the minimum and maximum number of characters allowed
Configuration	for the admin and system passwords.
	•	Admin Password Min
	•	Admin Password Max
	•	System Password Min
	•	System Password Max
Password Bypass	Allows you to bypass the System Password and the internal HDD password
	prompts during a system restart.
	• Disabled - Always prompt for the system and internal HDD password when
		they are set. This option is disabled by default.
	• Reboot Bypass - Bypass the password prompts on restarts (warm boots).
		NOTE: The system will always prompt for the system and internal HDD
		passwords when powered on from the off state (a cold boot). Also, the
		system will always prompt for passwords on any module bay HDDs that
		may be present.
Password Change	Allows you to determine whether changes to the system and hard disk
	passwords are permitted when an administrator password is set.
	• Allow Non-Admin Password Changes - This option is enabled by default.
TPM Security	This option lets you control whether the Trusted Platform Module (TPM) in the
	system is enabled and visible to the operating system.
	TPM Security - This option is disabled by default.
	TPM ACPI Support
	TPM PPI Deprovision Override
	Clear
	TPM PPI Provision Override
		NOTE: Activation, deactivation, and clear options are not affected if you
		load the setup program's default values. Changes to this option take effect
		immediately.
Computrace	This field lets you activate or disable the BIOS module interface of the optional
	Computrace Service from Absolute Software.
	• Deactivate - This option is disabled by default.
	•	Disable
	•	Activate
Chassis Intrusion	• Disable - This option is disabled by default.
	•	On-Silent
CPU XD Support	Allows you to enable or disable the execute disable mode of the processor.

39