Option |
| Description |
|
|
|
|
| – UEFI |
Advanced Boot Options |
| Allows you to Enable Legacy Option |
|
| ROMs |
|
| • Enabled (Default) |
Date/Time |
| Allows you to set the date and time. The |
|
| changes to the system date and time |
|
| takes effect immediately. |
Table 3. System Configuration |
|
|
|
| |
Option | Description | |
|
| |
Integrated NIC | Allows you to configure the integrated network controller. The | |
| options are: | |
| • | Disabled |
| • Enable UEFI Network Stack | |
| • | Enabled |
| • | Enabled w/PXE (Default) |
| • | Enabled w/Cloud Desktop |
Serial Port | Identifies and defines the serial port settings. You can set the | |
| serial port to: | |
| • | Disabled(Default) |
| • | COM1 |
| • | COM2 |
| • | COM3 |
| • | COM4 |
|
| NOTE: The operating system may allocate resources even if |
|
| the setting is disabled. |
SATA Operation | Allows you to configure the internal SATA | |
| controller. The options are: | |
| • | Disabled |
| • | ATA |
| • | AHCI (Default) |
Drives | Allows you to enable or disable the various drives | |
| • | |
| • | |
| • |
|
| Default Setting: All drives are enabled. | |
SMART Reporting | This field controls if the hard drive errors for the integrated | |
| drives are reported during system startup. This technology is | |
37