•Temporarily suspend testing if an error is detected or terminate testing when a
•View help messages that briefly describe each test and its parameters
•View status messages that inform you if tests are completed successfully
•View error messages that inform you of problems encountered during testing
When to Use the Embedded System Diagnostics
If a major component or device in the system does not operate properly, component failure may be indicated. As long as the processor and the system's input/output devices are functioning, you can use the system diagnostics to help identify the problem.
Running the Embedded System Diagnostics
You can run the embedded system diagnostics program from the USC main screen.
CAUTION: Use the system diagnostics to test only your system. Using this program with other systems may cause invalid results or error messages.
1As the system boots, press <F10> to start the controller.
2Click Diagnostics in the left pane and click Launch Diagnostics in the right pane.
The Diagnostics menu allows you to run all or specific diagnostics tests or to exit.
178
Running the System Diagnostics