Dell R515 owner manual Memory configuration Ensure that the memory

Message	Causes	Corrective Actions
Alert! Node	The memory configuration	Ensure that the memory
Interleaving	does not support node	modules are installed in a
disabled! Memory	interleaving, or the	configuration that supports
configuration	configuration has changed	node interleaving.
does not support	(for example, a memory	Check other system
Node	module has failed) so that	messages for additional
Interleaving.	node interleaving cannot be	information for possible
	supported. The system still	causes. For memory
	runs, but without node	configuration information,
	interleaving.	see "General Memory
		Module
		Installation Guidelines" on
		page 105. If the problem
		persists,
		see "Troubleshooting System
		Memory" on page 165.
Alert! Power	The system configuration	If any system components
required exceeds	of processor(s),	were just upgraded,
PSU wattage.	memory modules,	return the system to the
Check PSU and	and expansion cards may	previous configuration.
system	not be supported by the	If the system boots without
configuration.	power supplies.	this warning, then the
Alert!		replaced component(s) are
		not supported with this
Continuing
		power supply. If Energy
system boot
		Smart power supplies are
accepts the risk
		installed, replace them with
that system may
		High Output power supplies
power down
		to use the components.
without warning.
		See "Power Supplies" on
		page 102.
Alert! System	An error caused the	Check other system
fatal error	system to reboot.	messages for additional
during previous		information for possible
boot.		causes.

About Your System

41