Dell P01E, P776N manual Memory module connector Spring locks Tab Notch

4.Use your fingertips to carefully spread apart the upper memory module connector’s spring-locks until the module pops up.

5.Remove the upper memory module.

6.Use your fingertips to carefully spread apart the lower memory module connector’s spring-locks until the module pops up.

7.Remove the lower memory module.

1

2

3

5

4

1	memory module connector	4	spring locks (2)
2	tab	5	memory module
3	notch

CHAPTER 5: INSTALLING ADDITIONAL OR REPLACEMENT COMPONENTS

To replace the memory modules, perform the removal steps in reverse order. While inserting the memory module into the connector align the notch on the memory module to the tab on the connector.

NOTE: If the memory module is not installed properly, the computer may not boot.

036/036