APPENDIX A -
Installing Infrared Support for Windows 95
This section applies ONLY if IrLAN was not originally installed in your Windows 95 notebook (no Infrared icon in the Control Panel).
To install or update Windows 95 Infrared Drivers do the following:
1.Insert the CSI Media Installer CD. You will find the setup file in
\Software\Infrared Support for Windows 95 notebooks without infrared ONLY\setup.exe.
2.At the Welcome Screen click Next to begin the installation process, which updates your notebook’s hardware profile and adds the infrared device. Please skip to step 10 if your notebook’s infrared hardware is already installed and operational.
3.Click Yes if you agree to the License Agreement.
4.When the Add Infrared Device wizard is displayed, click on the Next button, and select the correct manufacturer and model of your portable computer as illustrated on the next page. It is important that you select the exact manufacturer; otherwise, your computer may connect at a speed significantly lower that 4Mbps. For example:
-
-
If your notebook is Fujitsu, click on it and then the correct model. If your notebook is IBM, click on it and then the correct model.