Configuring Windows CE Handheld PCs
This section describes
•How to configure your HPC to connect to the Clarinet EthIR Switch.
•How to start and end a connection once configuration is done.
•How to specify the HTTP proxy server in Pocket Internet Explorer.
Adding Direct Connection to Remote Networking
Each Windows CE HPC is bundled with a Microsoft Windows CE communication package that enables you to add and configure a new connection to a remote networking system. Follow the following step to add a new remote connection:
1.Select Start\Programs\Communication\Remote Networking menu from the task bar, as illustrated below.
2.Double click on Make New Connection, which brings up the Connection Configuration dialog. Enter a name for the new connection and specify it as a direct connection, as illustrated below.
3. Click Next to display the Make New Direct Connection dialog. Select Infrared Port as the device. Typically, each HPC has a
Note: It is unnecessary to click the Configure button because no change is required to the default settings in Device Properties.