3.Click on Windows Setup tab, choose Communications then click on Details button.
4.Check the item Direct Cable Connection, as illustrated above, and then click OK. Click OK again in the next window. Windows 98 may ask for the Windows 98 CD-ROM to be inserted into your CD-ROM drive. If the CD-ROM is not available enter \WINDOWS\OPTIONS\CABS in the path line of the dialog box.
Configure Infrared Monitor for Direct Cable Connection
1.Double-click the Infrared icon under Start\Settings\Control Panel, select Options tab and uncheck the Install software for Plug and Play devices within range as illustrated below. Note the COM port under Enable infrared communication. This is the virtual COM port, which your notebook’s IR port uses. In this example, the IR port uses COM4 (Refer to Configure Direct Cable Connection for the First Time, step 2, on page F-9).
F-7
