5.If the IrLAN connection is successful but only runs at 115Kbps verify your IR port specification for your notebook. If the port specification is 115Kbps then the notebook installation is complete. If the spec is 4Mbs and you are only able to connect at 115Kbps, you should request the IR 4Mbs Framer (device driver) from your notebook manufacturer and then update the Framer (see APPENDIX E) and repeat this section again. In the meantime, you can continue to use 115Kbps. The installation is complete.
The following figure illustrates the activated Infrared Monitor screen with successful IrLAN connection.
To interact with your network, you will need to configure the Microsoft IrLAN Adapter in your Network Configuration panel with the appropriate TCP\IP information.
Consult your network administrator for that information.