SNMP Variables Tab
This tab contains information about SNMP, as illustrated below. The Switch supports, up to, four SNMP managers. If SNMP is not used, do not modify the information in this tab section. If SNMP is used, these fields should be set by your system administrator.
IP Pool Tab (except ESB3011b)
This tab enables you to create a pool of dynamic IP addresses for assignment to IR/PPP devices as illustrated below:
If you intend to use any IR/PPP devices you must provide IP addresses in the IP Pool either manually or via DHCP. You can add or delete IP addresses to and from the pool respectively by clicking Add or Delete and then clicking the Update button. Alternatively, if DHCP Servers are available, invoking the Use DHCP on this screen will eliminate the need for managing IP Pool.