E
N
G
L
I
S
H
3.8 Adjustable Media Sensor
The adjustable media sensor is standard on the CLP 6001, 6401 and 7201e models. It can be fitted as an option to all other models.
If the printer has both a fixed sensor and an adjustable sensor installed, remember to select the “AjSensON” setting in the control panel. See section 2.5 for more details.
192.4
70.6
Mark (Yellow) | Guide rail upper |
37.7
The location of the media sensor is shown by the yellow position mark. This can be moved from left to right using the adjustment knob. Moving the adjustment knob will cause a click for each position change.
Remember to set the voltage levels for the new type of media as described elsewhere in this manual.
If the printer has both a fixed sensor and an adjustable sensor installed, remember to select the “AjSensON” setting in the control panel. See section 2.5 for more details.