Boca Research Turbo1x1 manual Turbo 2x2 Suggested Configuration

Page 17

17

6.Attach the cable(s) for the device(s) you will be using to the appropriate connector and tighten them down with screws attached to the end of the cable(s). The illustration below suggests several possible configurations (e.g., mouse, scanner, modem, and printer). Physical installation is complete.

è

Turbo 2x2 Suggested Configuration

Serial mouse

Scanner with parallel interface

Modem

Printer

Physical Installation

Image 17

Contents Adapter Page Before You Begin your Installation Damaged or Missing Items Contents Getting Started Turbo 1x1 1 SERIAL/1 Parallel Port Driver DisketteExpress Install SERIAL/2 Parallel Ports TurboSERIAL/1 Parallel Port Express Install Section One Introduction Introduction Series23456789012345 Select Section Two Physical InstallationIO Turbo Series Turbo 2x2 Suggested Configuration Turbo 1x1 Suggested Configuration Windows 98 Users Section Three Windows 98/95 ConfigurationWindows 95 Users Update Device Driver WizardNew Hardware Found Dialog Box Go to the Control Panel, System, Device Manager All Versions of WindowsDriver Installation IO Turbo Series DOS Section Four Windows 3.x/DOS ConfigurationIf a NON Plug and Play System is Detected Change displayed settings to standard addresses such as Symptom Possible Remedy Appendix a TroubleshootingTroubleshooting My system locks up Windows NT Notes Appendix B Windows NT ConfigurationTechnical Notes Troubleshooting InstallingSerial Port a and B 9-pin Line Name Pin # Appendix C Pin AssignmentsParallel Port a and B 25-pin Line Name Pin # Appendix D Servicing Your Boca Product IO Turbo Series Servicing Your Boca Product FCC Compliance Limited Warranty