Boca Research Turbo1x1 All Versions of Windows, Go to the Control Panel, System, Device Manager

Page 22

22

All Versions of Windows 95

1.You will have to restart Windows 95 for the changes to take effect. Click Yes.

2.Go to the Control Panel, System, Device Manager.

3.“Boca I/O Adapter” will appear under Multi-function adapter.

4.The following devices will appear under Ports (COM and LPT):

ECP Printer Port A

ECP Printer Port B

Communications Port A (HS)

Communications Port B (HS)

Depending on the card you have purchased, some devices may not be listed.

IO Turbo Series

Image 22
Contents Adapter Page Before You Begin your Installation Damaged or Missing Items Contents Getting Started Driver Diskette Turbo 1x1 1 SERIAL/1 Parallel PortExpress Install Turbo SERIAL/2 Parallel PortsSERIAL/1 Parallel Port Express Install Section One Introduction Introduction Series23456789012345 Section Two Physical Installation SelectIO Turbo Series Turbo 2x2 Suggested Configuration Turbo 1x1 Suggested Configuration Section Three Windows 98/95 Configuration Windows 98 UsersUpdate Device Driver Wizard Windows 95 UsersNew Hardware Found Dialog Box All Versions of Windows Go to the Control Panel, System, Device ManagerDriver Installation IO Turbo Series Section Four Windows 3.x/DOS Configuration DOSIf a NON Plug and Play System is Detected Change displayed settings to standard addresses such as Appendix a Troubleshooting Symptom Possible RemedyTroubleshooting My system locks up Technical Notes Appendix B Windows NT ConfigurationWindows NT Notes Installing TroubleshootingAppendix C Pin Assignments Serial Port a and B 9-pin Line Name Pin #Parallel Port a and B 25-pin Line Name Pin # Appendix D Servicing Your Boca Product IO Turbo Series Servicing Your Boca Product FCC Compliance Limited Warranty