21
The New Hardware Found Dialog Box
•New Hardware Found dialog box. Here, you are asked what driver files are associated with the new hardware. Do the following:
1.From the choices given, select Driver from disk provided by hardware manufacturer.
2.Windows 95 then displays the Install from Disk dialog box. Here, you are asked for the location of the driver files.
3.Insert the diskette and type the path for the location of the drivers (usually A:\). If ‘A:’ is not the correct drive letter, substitute the correct letter.
4.New Hardware Found is displayed repeatedly for each logical device. Depending on the card you are installing, these can include:
•ECP Printer Port A and B
•
•Boca I/O Adapter (this is the controller device for the card;
•Parallel Port Controller
•Serial Port Controller
5.Continue as instructed to complete Windows 95 configuration and see page 22.
Driver Installation