Changing the Delay Time
The sound from speakers can reach the listening position at different times depending the speaker placements. You can allow for this difference by changing the delay time of the center and surround speakers.
| 1, 14 |
4, 5 | ENTER |
2, 4, 6, 8, | 3, 5, 7, 9, |
10, 12 | 11, 13 |
1.Press [SETUP/MENU] once or twice in the stop mode or disc is not inserted.
The “MENU” screen appears on the TV screen.
MENU |
|
|
TIMER REC SET | ON | OFF |
AUTO REPEAT | ||
SAP | ON | OFF |
CH SETUP |
|
|
SYSTEM SETUP |
|
|
SPEAKER SETUP |
|
|
TVGuardian SETUP
2.Press [4] or [5] to select “SPEAKER SETUP”.
3.Press [ENTER].
The “SPEAKER SETUP” screen appears on the TV screen.
SPEAKER SETUP
VOL. ADJUST
DELAY ADJUST
4. Press [4] or [5] to select “DELAY ADJUST”.
SPEAKER SETUP
VOL. ADJUST
DELAY ADJUST
5.Press [ENTER].
The “DELAY ADJUST” screen appears on the TV screen.
DELAY ADJUST |
| |
| CENTER DELAY | 0ms |
| ||
| ||
| SURR. DELAY | 5ms |
| ||
6.Press [4] or [5] to select “CENTER DELAY”.
7.Press [ENTER].
DELAY ADJUST |
| |
| CENTER DELAY | 0ms |
| ||
| SURR. DELAY | 5ms |
| ||
| ||
Need help? Call 1-800-813-3435
8.Press [4] or [5] to select the center speaker delay time. (“0ms”, “1ms”, “2ms”, “3ms”, “4ms” and “5ms”)
Center speaker delay time
If D1<=D2, set the delay time to “0ms”. If D1>D2, set the delay time as follows:
Difference between D1 and D2 | Delay time | |
1 foot (Approx. 30.5cm) |
| 1ms |
2 feet (Approx. 61cm) |
| 2ms |
3 feet (Approx. 91.5cm) |
| 3ms |
4 feet (Approx. 122cm) |
| 4ms |
5 feet (Approx. 152.5cm) |
| 5ms |
Center speaker |
| |
Front left speaker |
| Front right speaker |
D2 | D1 |
|
D1 |
| |
D3 | D3 |
|
Surround left |
| Surround right |
speaker |
| speaker |
D1: The distance from the front speaker
D2: The distance from the center speaker
D3: The distance from the surround speaker
9.Press [ENTER].
“CENTER DELAY” and the selected delay time remain.
10.Press [5] to select “SURR. DELAY”.
DELAY ADJUST |
| |
| CENTER DELAY | 0ms |
| ||
| ||
| SURR. DELAY | 5ms |
| ||
11. Press [ENTER].
DELAY ADJUST |
| |
| CENTER DELAY | 0ms |
| ||
| ||
| SURR. DELAY | 5ms |
| ||
12.Press [4] or [5] to select the surround speaker delay time. (“0ms”, “5ms”, “10ms” and “15ms”)
Surround speaker delay time
If D1<=D3, set the delay time to “0ms”.
If D1>D3, set the delay time as follows:
Difference between D1 and D3 | Delay time |
5 feet (Approx. 152.5cm) | 5ms |
|
|
10 feet (Approx. 305cm) | 10ms |
|
|
15 feet (Approx. 457.5cm) | 15ms |
13.Press [ENTER].
“SURR. DELAY” and the selected delay time remain.
14.Press [SETUP/MENU] until the menu screen is cleared.
Note:
If no adjustments are made, the original display returns after approximately 60 seconds.
2B80201A [E] | 23 | 24/2/03, 7:14 PM |