Sanyo DWM-3500 Setting the Video Channel, Setting the Language, For a push-button TV tuner

Setting the Video Channel

To view playback of a recorded tape or DVD disc, or to watch a program selected by the VCR’s channel selector, the TV must be set to channel 3 or 4 (video channel).

When a TV is connected with the 75 ohm coaxial cable only.

1 2

5

1.Press [POWER] to turn on the unit.

2.Press [VCR] to select the VCR mode.

The VCR indicator on the front panel will light.

3.Set the channel selector switch on the rear panel to 3 CH or 4 CH.

OUTPUT	DVD/VCR OUTPUT			VHF/UHF
COMPONENT		AM LOOP
Y	VIDEO			IN
		FM 75Ω		(ANT)
PB	L
	AUDIO	AUDIO OUT
		(6–CHANNEL)
PR	R			OUT
		3 CH	4 CH
				( TV)

4.Turn ON the TV and set to channel 3 or 4 to correspond with the channel selected in step 3.

5.Press [TV/VCR] to select the VCR position. “VCR” will appear on the FL display.

6.Select any channel to receive a TV station in your area. The channel number will appear on the screen for approximately 4 seconds.

For a push-button TV tuner

If channel 3 or 4 corresponding to the video channel cannot be tuned on your TV, proceed as follows: set the channel selector switch on the main unit’s rear panel and the TV to 3 CH or 4 CH, play back a prerecorded tape and tune the TV to receive a sharp color picture from the video cassette recorder. Refer to your TV owner’s manual for details.

Setting the Language

You can choose from three different languages (English, Spanish, and French) for the on-screen displays.

1, 5

ENTER 4,5

1.Press [SETUP/MENU].

If you use the unit for the first time and press [SETUP/ MENU], instead of the main menu screen below the “SYSTEM SETUP” menu screen in step 3 may appear.

MENU
TIMER REC SET	ON	OFF
AUTO REPEAT
SAP	ON	OFF
CH SETUP
SYSTEM SETUP
SPEAKER SETUP

TVGuardian SETUP 〈4/5/ENTER/MENU〉

2.Press [4] or [5] to select “SYSTEM SETUP”, then press [ENTER].

3.Press [4] or [5] to select “LANGUAGE/IDIOMA/LANGUE”, then press [ENTER].

SYSTEM SETUP

CLOCK SET

LANGUAGE/IDIOMA/LANGUE

NO NOISE BACKGROUND

ON OFF

AUTO CLOCK ON OFF

STANDARD TIME

DAYLIGHT SAVING TIME

〈4/5/ENTER/MENU〉

4.Press [4] or [5] to select the desired language: English (ENGLISH), Spanish (ESPAÑ OL) or French (FRANCAIS), then press [ENTER].

〈4/5/ENTER/MENU〉

5. Press [SETUP/MENU] until the menu screen is cleared.

Notes:

•Both the VCR and the DVD have their own menu (see page E56).

•If no buttons are pressed for more than 60 seconds, the MENU screen will return to normal TV-operation automatically.

-E24-

2B80201A [E] P17-26 24 24/2/03, 7:14 PM