Sanyo DWM-3500 Recording a TV Program, Recording and viewing the same TV program

RECORDING

Recording a TV Program

Recording and viewing the same TV program

Preparation:

•Turn ON the TV and set to the video input mode.

•Press [VCR] to select the VCR mode. (The VCR indicator on the front panel will light.)

VCR DVD

4

5 2

4

4.Press the number buttons [0–9] or [CH] +/– to select the channel to be recorded.

In the TV mode

1–9 Press [0] and then [1]–[9] as required. Example: To select “2”, press [0][2].

10–69 Press 2 digits in order. Example: Press [2][2] for “22”.

In the CATV mode

1–9 Press [0] twice and then [1]–[9] as required.

Example: To select “2”, press [0][0][2].

10–12 Press [0] first and then the remaining 2 digits in order from left to right.

Example: Press [0][1][2] for “12”.

13–99 Press 2 digits in order. Example: Press [2][2] for “22”.

100–125 Press the 3 digits in order. Example: Press [1][1][0] for “110”.

CH 110

1.Load a cassette tape with the erase prevention tab intact. The unit will automatically turn on.

2.Press [TAPE SPEED] to select the desired tape speed SP or SLP.

The tape counter and SP or SLP will appear on the TV screen for approximately 4 seconds.

00 : 00 : 00 SP

3.Set the “TV/CATV” option to the appropriate position (See “TV/CATV selection” on page E25).

TV: VHF/UHF channels

CATV: CABLE TV channels

VHF/UHF/CATV CHANNELS

TV	CATV
VHF	VHF
2–13	2–13
UHF	STD/HRC/IRC
14–69	14–36 (A) (W)
	37–59 (AA) (WW)
	60–85 (AAA) (ZZZ)
	86–94 (86)	(94)
	95–99 (A-5)	(A-1)
	100–125 (100)(125)
	01 (5A)

5.Press [REC/OTR].

“m” will appear on the TV screen for approximately 4 seconds and “REC” will appear on the FL display.

CH 110

INDEX

Notes:

•If the erase prevention tab is removed, the tape will eject when [REC/OTR] is pressed for recording.

•If you wish to watch the DVD playback during the normal recording on VCR, press [DVD] to change to DVD mode and perform the DVD playback (see page E39).

-E31-

2B80201A [E] P27-37 31 24/2/03, 7:14 PM