Sanyo DWM-3500 instruction manual Basic Playback, Vcr Dvd

Basic Playback

Preparation:

•Turn ON the TV and set to the video input mode.

•Press [VCR] to select the VCR mode. (The VCR indicator on the front panel will light.)

1.Load a prerecorded tape. (When loading a cassette tape without the erase prevention tab, playback will start automatically.)

2.Press [a].

•Playback will start.

•“a” will appear on the TV screen for approximately 4 seconds.

To stop playback

Press [n].

The tape will stop but remain fully loaded and ready to play. “n” will appear on the TV screen for approximately 4 seconds.

To rewind the tape or forward it rapidly

1.Press [n] to stop the playback or recording.

2.To rewind the tape, press [d].

• “d” will appear on the TV screen for approximately 4

seconds.

To forward the tape, press [c].

•“c” will appear on the TV screen for approximately 4 seconds.

3.To stop the tape-winding, press [n]. To switch to playback directly (without STOP), press [a].

Forward/Reverse picture search mode

When the tape is being winded, you can switch to picture search mode (see next page). To do this, press [d] or [c] and hold it down. The unit will resume the tape winding as soon as the button is released.

Notes:

•This VCR selects the playback tape speed SP, LP or SLP automatically.

•The Cassette tape and DVD disc can be played back simultaneously. If you press [VCR] or [DVD], the tape playback and DVD playback alternate with each other on the screen.

VCR DVD

an

(Play) (Stop)

dc

			d					c
POWER
REC	CHANNEL	EJECT	VCR/DVD	AM/FM	-	PRESET	+	VOLUME	OPEN/CLOSE

VIDEO IN L-AUDIO IN-R STOP PLAY

n STOP PLAY a

Need help? Call 1-800-813-3435

-E28-

2B80201A [E] P27-37 28 24/2/03, 7:14 PM