Sanyo DWM-3500 Inserting Batteries, Remote Control Range, To Set the Remote Control Code for TV

Inserting Batteries

1 2

Two “AA” batteries (not supplied)

Note:

Remove the batteries if the remote control is not to be used for a month or more. Batteries left in the unit may leak and cause damage.

IMPORTANT NOTE:

SPENT OR DISCHARGED BATTERIES MUST BE RECYCLED OR DISPOSED OF PROPERLY IN COMPLIANCE WITH ALL APPLICABLE LAWS.

FOR DETAILED INFORMATION, CONTACT YOUR LOCAL COUNTY SOLID WASTE AUTHORITY.

Remote Control Range

Remote sensor

POWER

REC CHANNEL EJECT VCR/DVD AM/FM - PRESET + VOLUME OPEN/CLOSE

VIDEO IN L-AUDIO IN-R STOP PLAY

		Within approx.
30°	30°	23 feet (7 meters)

To Set the Remote Control Code for TV

This remote control can operate the basic functions of TVs made by the manufacturers listed below.

To enter the remote control code for your brand of TV, follow the steps below.

1.In the chart below, find the code corresponding to your brand of TV.

2.While holding down [(TV CONTROL) POWER], enter the 2- digit code using the number buttons [0–9], then release [(TV CONTROL) POWER].

• The remote control is now set to operate your TV.

TV brands	Code
ADMIRAL	05, 10, 13
EMERSON	17
FISHER	03
GE	07
GOLD STAR	01
HITACHI	02
JVC	15
MAGNAVOX	08
MATSUSHITA	12, 18
MITSUBISHI	14
PANASONIC	12, 18
QUASAR	12, 18
RCA	06
SAMSUNG	16
SANYO	03
SHARP	00, 13
SONY	11
TECHNOL ACE	05
TOSHIBA	04
ZENITH	09, 10

Number buttons

Need help? Call 1-800-813-3435

(TV CONTROL) POWER

Notes:

•Only remote-controlled TVs can be operated using this remote control. (Refer to your TV instruction manual for more details.)

•There may be some TV models that cannot be operated with this remote control. If this is the case, use the original remote control supplied with the TV.

IMPORTANT NOTE:

If the batteries in the remote control are changed, the code settings for the TV must be re-entered.

Write your code number below for future reference.

TV:

-E8-

2B80201A [E] P01-16 8 24/2/03, 7:13 PM