Duplicating a Video Tape
If you connect the VCR to another VCR or camcorder, you can duplicate a previously recorded tape.
Make all connections before turning on the power.
Recording a DVD/CD Disc
You can record disc material in DVD, Audio CD, etc. onto a Video tape with this VCR.
Connection with second Video recorder
Playback VCR
To VIDEO OUT
To AUDIO (R) OUT
To AUDIO (L) OUT
Recording VCR (Main unit)
AUDIO/VIDEO cables (not supplied)
To VIDEO IN 
To AUDIO (R) IN
To AUDIO (L) IN
Connection with Video camera
Playback Camcorder
Recording VCR (Main unit)
To AV Jack | To AUDIO (R) IN | |
To VIDEO IN | ||
To AUDIO (L) IN | ||
|
AUDIO/VIDEO cables (not supplied)
For duplicating a previously recorded tape from a camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown above.
1.Load a blank cassette tape with the erase prevention tab intact into the recording VCR.
Load a previously recorded tape into the playback VCR or
CAMCORDER.
2.Press [TAPE SPEED] to select the desired tape speed SP or SLP.
“SP” or “SLP” appears on the TV screen.
00 : 00 : 00 SP
Preparation
•Turn ON the TV and select the corresponding video input.
•Load a cassette tape with the erase prevention tab intact.
•Load a DVD/CD disc.
•Press [VCR] to select the VCR mode. (The VCR indicator on the front panel will light.)
VCR | 2 |
1
4
3 | 5 |
1.Press [TAPE SPEED] to select the desired tape speed SP or SLP.
“SP” or “SLP” appears on the TV screen.
00 : 00 : 00 SP
2.Press [DVD] to select the DVD mode.
3.Press [a] to start playback.
4.Press [REC/OTR] to start recording.
The unit will change to the VCR mode automatically and the playback picture or sound will be duplicated on the video cassette tape.
•It is recommended that you set the Speed to the SP mode on the recording VCR for best results.
3.Press [INPUT] to select AUDIO/VIDEO input position. “L” will appear on the FL display.
4.Press [REC/OTR], then press [k]. (Recording standby mode)
INPUT
REC/OTR 
TAPE SPEED
k
5.Press the play button on the playback VCR or CAMCORDER, then press the pause button. (Playback standby mode)
6.Release the recording pause and the playback still simultaneously to begin the duplicating process.
5.Press [n] if you finish recording.
If you wish to stop a main unit disc, press [DVD] to change the DVD mode, then press [n].
Notes:
•You may not be able to record the beginning of the disc. Begin VCR recording once program playback commences on the DVD.
•You can not record discs encoded with copy guard function. The following icon will show up on the TV screen.
Need help? Call 1-800-813-3435
2B80201A [E] | 37 | 24/2/03, 7:14 PM |