Albatron Technology PX845PEV-800 manual Problem

Page 46

Albatron Anniversary Special Edition PX845PEV-800

Problem 10:

Keyboard failure.

Causes: Keyboard is disconnected.

Solutions: Reconnect keyboard. Replace keyboard if you continue to experience problems.

Problem 11:

No color on screen.

Causes:

1.Faulty Monitor.

2.CMOS incorrectly set up. Solutions:

1.If possible, connect monitor to another system. If no color appears, replace monitor.

2.Call technical support.

Problem 12:

The screen displays “C: drive failure.”

Causes: Hard drive cable not connected properly.

Solutions: Check hard drive cable.

Problem 13:

Cannot boot the system after installing a second hard drive.

Causes:

1.Master/slave jumpers not set correctly.

2.Hard drives are not compatible / different manufacturers. Solutions:

1.Set master/slave jumpers correctly.

Run SETUP program and select the correct drive types. Call drive manufacturers for possible compatibility problems with other drives.

Problem 14:

Missing operating system on hard drive.

Causes: CMOS setup has been changed.

Solutions: Run setup and select the correct drive type.

Problem 15:

Certain keys do not function.

Causes: Keys jammed or defective.

Solutions: Replace keyboard.

43

Image 46
Contents Albatron PX845PEV-800 Copyright Contents Getting Started IntroductionSpecifications CPULAN Bios Quick Content Table Function Content LocationConfiguration Hardware Installation SubjectCPU Processor Installation CPU Socket 478 Configuration StepsFrequency / Voltage Control FAN HeadersWatch Dog Timer FormulasMemory Installation RAM Module InstallationMemory installation note DIMM1 DIMM2 DIMM3PS/2 Mouse & PS/2 Keyboard Connectors KB/MS Back Panel ConfigurationUSB & LAN Connectors USB/LAN Serial Interface COM1/ COM2 Serial and Parallel Interface PortsParallel Interface Port PRT Connector Configuration Front Panel Indicator SW/LEDSpeaker Speaker Connector IrDA Infrared ConnectorIDE1 Primary IDE Connector Floppy Disk Connector FDCHard Disk Connectors IDE1/ IDE2 IDE2 Secondary IDE ConnectorFront USB Headers USB2 / USB3 Case Open Warning connector Case OpenHeaders & Jumpers USB Bracket 2 Ports or 4 PortsClear Cmos Jumper JP1 JP1AGP Accelerated Graphics Port Slot SlotsPCI Peripheral Component Interconnect Slots Power Supply Attachments ATX Power Connector ATX12V & AtxpwrBios Setup Supported CPUs Key FunctionMain Menu Main Menu Setup Configuration Options Boot Other Device Advanced Bios FeaturesFirst /Second/Third/ Boot Device Boot Up Floppy SeekTypematic Rate Setting Quick Power On Self TestBoot Up NumLock Status Typematic Delay MsecAdvanced Chipset Features PnP/PCI Configurations Frequency/Voltage Control On-Chip Primary/Secondary PCI IDE Integrated PeripheralsIntel OnChip IDE Device IDE Primary/Secondary/Master/Slave PIOIntel OnChip PCI Device Onboard I/O Chip SetupInit Display First UR2 Duplex Mode Uart Mode SelectIR Transmission Delay Use IR PinsPower Management Power ManagementRun Vgabios if S3 Resume Acpi Suspend TypeVideo Off Method Suspend ModeHDD Power Down Video Off In SuspendReload Global Timer Events Date of Month AlarmTime hh mm ss Alarm USB KB Wake-up From S3Hardware Monitor Case Open WarningLoad System Turbo Settings Load DefaultsLoad System Default Settings Load Cmos From BiosExit Menu Save & Exit SetupExit Without Saving Software Installation Software SetupSoftware List Troubleshooting ProblemProblem Problem Software Installation SpecificationHardward installation Appendix I:Appendix II: Appendix III: Albatron USA Inc