Aspire Digital 8943G manual Internal Microphone Failure, Microphone Problems

7.Select Speakers and click Configure to start Speaker Setup. Follow the onscreen prompts to configure the speakers.

8.Remove and recently installed hardware or software.

9.Restore system and file settings from a known good date using System Restore.

If the issue is not fixed, repeat the preceding steps and select an earlier time and date.

10.Reinstall the Operating System.

11.If the Issue is still not resolved, see “Online Support Information” on page 349.

Internal Microphone Failure

If the internal Microphone fails, perform the following actions one at a time to correct the problem. Do not replace non-defective FRUs:

Start

Check M/B Mic.

cable

OK

Check MIC wire of LCD module

Swap M/B

Microphone Problems

OK

	Re-assemble the
NG	MIC cable to M/B

OK

	Swap MIC wire of
NG
	LCD module

If internal or external Microphones do no operate correctly, perform the following actions one at a time to correct the problem.

1.Check that the microphone is enabled. Navigate to Start´ Control Panel´ Hardware and Sound´ Sound and select the Recording tab.

2.Right-click on the Recording tab and select Show Disabled Devices (clear by default).

3.The microphone appears on the Recording tab.

Chapter 4 179