Chapter 1 19
Memory Combinations
NOTE: Above table lists some system memory configurations. You may combine DIMMs with various
capacities to form other combinations. On above table, the configuration of slot 1 and slot 2 could be
reversed.
Video Interface
Slot 1 Slot 2 Total Memory
0MB 512MB 512MB
0MB 1024MB 1024MB
0MB 2048MB 2048MB
512MB 512MB 1024MB
512MB 1024MB 1536MB
512MB 2048MB 2560MB
1024MB 0MB 1024MB
1024MB 512MB 1536MB
1024MB 1024MB 2048MB
1024MB 2048MB 3072MB
2048MB 0MB 2048MB
2048MB 512MB 2560MB
2048MB 1024MB 3072MB
2048MB 2048MB 4096MB
Item Specification
Chipset VGA chip Build-in Intel Graphics Media
Accelerator HD Broadway-Pro/Madison-Pro
Type Arrandale HM55 PCH MCP (Multi-Chip Package) CPU
Package rPGA 989 • 962-pins FCBGA 29mm x 29mm
Features • The integrated graphics controller
contains a refresh of the 5th
generation graphics core.
• IntelR Dynamic Video Memory
Technology support
• IntelR Smart 2D Display
Technology (IntelR S2DDT)
• IntelR Clear Video Technology
• MPEG2 Hardware
Acceleration
• WMV9/VC1 Hardware
Acceleration
• AVC Hardware Acceleration
•ProcAmp
• Advanced Pixel Adaptive De-
interlacing
• Sharpness Enhancement
• De-noise Filter
• High Quality Scaling
• Film Mode Detection (3:2 pull -
down) and Correction
•IntelR TV Wizard
• Microsoft DirectX*11 support
• Analog CRT DAC Interface Support
(300MHz DAC/up to QXGA/Hot -
Plug)
• Dual-Channel LVDS interface
support 2x24 bpp panels
• Fully compliant with PCI Express Base
Specification Rev. 2.1
• Support CRT/LVDS/HDMI/DP interface
(concurrent)
• Dual-channel LVDS interface support:
single channel 24 bpp dual link
• HDCP compliance embed-in
• Full POWERPLAYTM 8.0 support
• LVDS / Engine and Memory / DP Spread
Spectrum Support
• H.264 implementation is based on the
ISO/IEC 14496-10 specification.
• VC-1 implementation is based on the
SMPTE 421M specification.
• MPEG2 implementation is based on the
ISO 13818 -2
• Supports top quality DVD and Blu -Ray
disc with the lowest CPU usage.
• VDDC (GPU core power supply)
• VDDCI (GPU I/O power supply)
• 1V (DP PLL power supply)
• 1.5V (VRAM and memory control power
supply)
• 1.8V (CRT DAC and LVDS power supply)
• 3V (Peripheral power supply)