Hypercom ICE 5000 manual 940184-003, rev. B Hypercom Corporation Xiii

l

The ICE 5000 and 5500 Hardware and Installation Operators Manual is a comprehensive guide to working with Hypercom® ICE 5000 and 5500 terminals.

The ICE 5000 and 5500 terminals are part of the Hypercom Interactive Consumer Environment (ICE) family of touch-screen-based terminals and peripherals. All ICE terminals support traditional terminal functions as well as PIN pad and signature capture functionality. The ICE family employs a modular concept. The basic ICE unit is a multifunction peripheral for either a T7x terminal or ECR. With its printer and modem module attached, it becomes a fully-functional terminal and PIN pad.

i

The guide contains the following chapters:

Chapter 1, Hardware Information: General descriptions of hardware required to operate the ICE 5000 or 5500 terminal

Chapter 2, Installation Procedures: Step-by-step instructions for starting the ICE 5000 or 5500 terminal

Chapter 3, Setup Procedures: Step-by-step instructions for procedures including

nconfiguration, program load, initialization, and paper loading

Chapter 4, Wireless POS Terminal Interface: Descriptions and step-by-step instructions for operating the 900 MHz wireless POS terminal interface

z

This guide is intended for network administrators-merchants-operators-technicians or those who oversee the configuration and daily maintenance of the various networks.

r

When working with the ICE 5000 or 5500 terminal, the ICE 5000 PIN Pad Loader Operators Manual may be useful as reference material.

940184-003, rev. B Hypercom Corporation xiii