Hypercom ICE 5000 manual Description Terminal response

Chapter 2

v

Following a successful key injection, a double beep indicates that the terminal has automatically initiated its self-diagnostic routine.

The software and download status of the terminal is displayed during the self-test, which lasts approximately four seconds. During this time, if the terminal is loaded with the security key, the displays shown in the following table are typical.

Table 2-1. Self-test and diagnostics with software loaded

Description	Terminal response
Software: Software name and version.		IDENTIFICATION
DLL: Tracks the number of downloads. This is	SOFTWARE	XX_XXXXXX
	DLL	00
controlled by Term-Master.	OS	T5KBOOTXXX
OS: Operating System and version.	TERMINAL	NNNNNNNN
	WAIT SELF TEST
Terminal: Terminal ID number.
Installed memory is displayed. The display	MEMORY PAGE STATUS:
indicates one megabyte of memory installed.	BOOT: XXXX
	01: AAAAAAAAAFFFFFF
	17: FFFFFFFFFFFFFF

A memory page may be in one of the states shown in the following table.

Table 2-2. Memory page states

Status	Description
A	Active: application resident
C	Corrupt: checksum error
F	Free
L	Lost Communication
I	Inactive
U	Unknown
-	No fit: not available for use

2-4 ICE 5000 and 5500 Hardware and Installation Operators Manual 940184-003, rev. B