Chapter 1
i
This section describes general safety precautions that must be followed to ensure proper installation and maintenance of the POS product family.
ig
Electrical Safety: Observe all normal electrical safety practices when operating any equipment attached to an active power source.
Authorized Service: Only a Hypercom authorized service technician or an authorized repair station can perform equipment servicing, adjustment, maintenance, or repairs on the POS products.
Electrostatic Damage: Before performing any maintenance on POS products, ensure that you wear a static strap and are grounded to the POS products.
To ensure protection of the telecommunications port against lightning damage, this product requires connection to the building protective earthing. Therefore, the integrity of protective earthing must be ensured. Use only the Hypercom provided power supply and power cord. Ensure that power is supplied from a suitable power outlet to the supply when the terminal is connected to the telephone line
g
Electromagnetic Compatibility: This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take appropriate measures
Danger of explosion: If the battery is installed incorrectly, it could explode. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer instruction.
ICE 5000 and 5500 Hardware and Installation Operators Manual |