Muratec MFX-3050 Sending a fax automatically, Sending a fax manually

Page 47

Recommended resolution settings for different original document types are described in the table below:

Mode

Recommended for:

 

 

Standard

Originals with normal sized characters.

 

 

Fine

Originals containing small characters or thin lines or

 

originals printed using a dot-matrix printer.

 

 

Super Fine

Originals containing extremely fine detail. Super

 

Fine mode is enabled only if the machine with

 

which you are communicating also supports the

 

Super Fine resolution.

 

Notes

 

• For memory transmission, Super Fine

 

mode is not available. The resolution

 

setting is automatically changed to Fine.

•When your machine is set to Super Fine resolution and the fax machine with which you are communicating does not support Super Fine resolution, the machine transmits using the highest resolution mode supported by the other fax machine.

Photo Fax

Originals containing shades of gray or photographs.

 

 

Color Fax

Originals with colors. Sending a color fax is enabled

 

only if the machine with which you are

 

communicating supports color fax reception and

 

you send the fax manually. In this mode, memory

 

transmission is not available.

Note

The resolution setting is applied to the current fax job. To change the default setting, see page 10.2.

Darkness

You can select the default contrast mode to fax your originals lighter or darker.

1Press Fax.

2Press Menu, and then OK when Fax Feature appears on the bottom line of the display.

3Press OK when Darkness appears.

4Press the Scroll buttons until the option you want appears and press OK.

5Press Stop/Clear to return to Standby mode.

Note

The darkness setting is applied to the current fax job. To change the default setting, see page 10.2.

Sending a fax automatically

1Press Fax.

2Load originals face up into the ADF, or place a single original face down on the scanner glass.

For details about loading an original, see page 5.1. Ready to Fax appears on the top line of the display.

3Adjust the resolution and the darkness to suit your fax needs.

4Enter the receiving fax machine’s number.

You can use speed buttons, speed dial numbers, or group dial numbers. For details about storing and searching for a number, see page 10.2.

5Press Start.

6If an original is placed on the scanner glass, select Yes to add another page. Load another original and press OK.

7When you have finished, select No at the Another Page? prompt.

After the number is dialed, the machine begins sending the fax when the receiving fax machine answers.

Note

When you want to cancel a fax job, press Stop/Clear at any time while sending.

Sending a fax manually

1Press Fax.

2Load originals face up into the ADF, or place a single original face down on the scanner glass.

For details about loading an original, see page 5.1.

3Adjust the resolution and the darkness to suit your fax needs. See page 9.1.

4Press On Hook Dial. You hear a dial tone.

5Enter the receiving fax machine’s number.

You can use speed buttons, speed dial numbers, or group dial numbers. For details about storing and searching for a number, see page 10.2.

6Press Start when you hear a high-pitched fax signal from the remote fax machine.

Note

When you want to cancel a fax job, press Stop/Clear at any time while sending.

9.2 <Faxing>

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Page Page Contents Basic printing Fax setupUsing USB flash memory Ordering supplies and accessoriesSpecifications MaintenanceTroubleshooting Installing accessoriesImportant Precautions and Safety Information FCC Information to the User Canadian Radio Interference RegulationsYou should also know that Approvals and CertificationsLimited warranty Page Introduction Special featuresFront view Rear view Printer overviewOK Confirms the selection on the screen Start Starts a job Control panel overviewMFX-3050 On Hook Dial Engages the telephone lineFinding more information Understanding the Status LEDClearance space Selecting a locationMenu overview System setupCopy Setup Scan Feature Network System Setup Scan SetupChanging the display language Setting the date and timeChanging the default mode Changing the clock modeEntering characters using the number keypad Setting soundsSetting print job timeout Using the save modesSupplied software Software overviewWindows Printer driver featuresPostScript Feature System requirementsRequirements LinuxMacintosh Supported operating systems Network setupConfiguring TCP/IP Via network administration programsStatic addressing Configuring EtherTalkConfiguring IPX frame types Dynamic addressing BOOTP/DHCPPrinting a network configuration Setting Ethernet speedRestoring the network configuration ADF Loading originals and print mediaLoading originals On the scanner glassSelecting print media Supported print media types and sizes Type Size Dimensions Weight1 Capacity2Guidelines for special print media Media sizes supported in each modeGuidelines for selecting and storing print media Tray Loading paperChanging the size of the paper in the paper tray Loading paper in the tray 1 or optional trayLoad the paper with the side to be printed on facing up Multi-purpose trayPrinting to the output tray Setting the paper size and typeSelecting an output location Printing to the rear cover Darkness Changing the settings for each copyCopying Selecting the paper trayCollation Changing the default copy settingsUsing special copy features Reduced or enlarged copyPlace Front Side and PressStart appears on the display ID card copyingPoster copying Erasing background images Setting copy timeoutCopying on both sides of paper Clone copyingDouble-click the Samsung SCX-5x30 Series icon Canceling a print jobBasic printing Printing a documentPress Scan/Email Scanning to an application using a local ConnectionScanning Scanning basicsPreparing for network scanning Scanning using a network connectionScanning Setting up an SMB serverClick Machine Settings and SMB Setup Click Server List Scanning to a network clientScanning to an FTP server Setting network scan timeoutScanning to Email Scanning to an SMB server Changing the settings for each scan jobChanging the default scan settings Setting up Address BookPrinting Address Book Configuring group email numbersUsing Address Book entries Searching Address Book for an entryPress Resolution Setting the fax headerAdjusting the document settings ResolutionSending a fax manually Sending a fax automaticallyChanging receiving modes Confirming a transmissionAutomatic redialing Redialing the last numberReceiving automatically in Ans/Fax mode Receiving automatically in Fax modeReceiving manually in Tel mode Receiving manually using an extension TelephoneReceiving faxes in memory Receiving in secure receiving modeActivating secure receiving mode Deactivating secure receiving modeDown on the scanner glass Printing received faxes on both sides of paperSending a fax to multiple destinations Press FaxSending a priority fax Sending a delayed faxAdding pages to a delayed fax Canceling a delayed faxForwarding received faxes to another fax machine Forwarding faxesForwarding sent faxes to another fax machine Forwarding sent faxes to email addressReceiving options Fax setupChanging the fax setup options Sending optionsSpeed buttons Changing the default document settingsSetting up Phone Book Printing sent fax report automaticallyGroup dial numbers Speed dial numbersPrinting Phone Book Searching Phone Book for an entryDeleting a Phone Book entry Scanning to a USB memory device Using USB flash memoryAbout USB memory Plugging in a USB memory deviceCustomizing Scan to USB Printing from a USB memory deviceManaging USB memory Backing up dataViewing the USB memory status Formatting a USB memory deviceToner cartridges Ordering supplies and accessoriesAccessories Accessory Description Part numberOther available reports MaintenancePrinting reports Printing a reportClearing memory Cleaning your machineCleaning the outside Cleaning the insideToner cartridge storage Cleaning the scan unitMaintaining the toner cartridge Expected cartridge life Redistributing tonerReplacing the toner cartridge Cleaning the drumClearing the Toner Empty Replace Toner message Maintenance PartsPrinting continuously when the Toner Empty message appears Sending new toner notificationReplacing the ADF rubber pad Checking replaceablesChecking the machine’s serial number To access SyncThru Web ServiceManaging your machine from the web Clearing document jams TroubleshootingRoller misfeed Clearing paper jamsFuser area or around the toner cartridge Optional tray Multi-purpose trayPaper exit area Duplex Jam Duplex unit areaTips for avoiding paper jams Understanding display messages Cycle Power Message Meaning Suggested solutions Invalid ServerLine Error Low Heat ErrorSend Error Message Meaning Suggested solutions Retry Redial?Self Diagnostic TemperatureToner cartridge-related messages Printing problems Solving other problemsPaper feeding problems Properties, click the Details Settings and then PrintersSpool Settings button SCX-5x30 Series PCLPrinting quality problems Back of printouts Condition Suggested solutions Wrinkles or creasesMisformed CharactersSoftware Section for details Copying problemsThis option through Printer Settings Utility or CurlScanning problems Fax problems Network Scan problemsInstallable Options section Common Windows problemsCommon PostScript problems Problem Possible Cause SolutionProblem Possible Cause and Solution Common Linux problemsProblem Suggested solutions Common Macintosh problemsDisconnect the power cord Installing accessoriesPrecautions when installing accessories Installing a memory DimmSelect the Samsung SCX-5x30 Series PS printer Activating the added memory in the PS printer propertiesPrinter specifications SpecificationsGeneral specifications Facsimile specifications Scanner and copier specificationsNumerics IndexSystem requirements Macintosh Software section Contents Using Windows Postscript Driver Using Your Printer in Linux Select Typical installation for a local printer. Click Next Installing Printer SoftwareInstalling Software for Local Printing Typical InstallationCustom Installation Select the components to be installed and click Next Select Custom installation. Click NextInstalling Software for Network Printing Custom Installation Installing Printer Software in Windows Select the components you want to reinstall and click Next Reinstalling Printer SoftwareNext Removing Printer SoftwareSelect your printer driver from the Name drop-down list Printing a DocumentPrinting to a file PRN Paper Orientation Printer SettingsLayout Tab Scaling Printing Paper TabSource Graphics Tab Image ModeResolution Toner Save ModePrinter Tab Extras TabAbout Tab Using Help Using a Favorite SettingPrinting Multiple Pages on One Sheet of Paper N-Up Printing Advanced PrintingPrinting Booklets Printing PostersNone Printing on Both Sides of PaperPrinting a Reduced or Enlarged Document Fitting Your Document to a Selected Paper SizeEditing a Watermark Using WatermarksUsing an Existing Watermark Creating a WatermarkCreating a New Page Overlay Using OverlaysWhat is an Overlay? Using a Page OverlayAdvanced Using Windows PostScript DriverOverview Direct Print Utility Using Direct Print UtilitySelect Local Port and click New Port Setting Up a Host ComputerSetting Up a Client Computer Check the Share this printer boxToner Level Troubleshooting GuidePrinter Setting Understanding Smart PanelUsing Onscreen Help File Opening the Troubleshooting GuideUsing Printer Settings Utility Changing the Smart Panel Program SettingsUninstalling SmarThru Scanning Using SmarThruUsing SmarThru Settings Scanning Process with TWAIN- enabled SoftwareScanning Using the WIA Driver Getting Started Installing the Unified Linux DriverInstalling the Unified Linux Driver Click Uninstall Uninstalling the Unified Linux DriverPrinters Tab Using the Unified Driver ConfiguratorPrinters Configuration Opening the Unified Driver ConfiguratorSharing Ports Between Printers and Scanners Scanners ConfigurationPorts Configuration Classes TabPrinting from Applications Configuring Printer Properties Printing a DocumentClick Properties Scanning a DocumentPrinting Files Adding Job Type Settings Using the Image ManagerTools Function Installing Software for Macintosh 10Using Your Printer with a MacintoshFor a Network-connected Macintosh Setting Up the PrinterInstall the Scan driver Uninstalling the Scan driverPrinting a Document Changing Printer SettingsLayout Setting PrintingFit to Printer Features SettingResolutionQuality Printing Multiple Pages on One Sheet of PaperDuplex Printing ScanningIndex Rev.1.05
Related manuals
Manual 2 pages 7.5 Kb

MFX-3050 specifications

The Muratec MFX-3050 is a multifunctional printer designed to meet the demands of modern workplaces with its versatile features and advanced technology. This compact and robust device excels in delivering printing, copying, scanning, and faxing capabilities, making it an ideal solution for small to medium-sized businesses.

One of the standout characteristics of the MFX-3050 is its impressive print speed. Capable of producing up to 30 pages per minute, it ensures that users can efficiently complete their printing tasks without unnecessary delays. This speed is complemented by its first-page-out time, which is remarkably quick, allowing users to receive their documents almost instantly.

In terms of print quality, the MFX-3050 does not disappoint. With a maximum print resolution of 1200 dpi, it provides sharp and vibrant documents, suitable for both text and graphics. This high-quality output is essential for professionals who need to make a strong impression with their documentation.

The device features a user-friendly interface, equipped with a color touchscreen display that simplifies operation. Users can easily navigate through various functions, adjust settings, and monitor job status, enhancing overall productivity. The MFX-3050 also offers a range of connectivity options, including USB, Ethernet, and Wi-Fi, allowing seamless integration into any office network.

Another significant advantage of the MFX-3050 is its scanning capabilities. With the ability to scan at 600 dpi and a robust automatic document feeder, users can quickly digitize multi-page documents. The device supports various file formats, making it easy to share scanned files across different platforms.

Security is a crucial consideration for any office environment, and the MFX-3050 addresses this concern with built-in security features. These include secure print, user authentication, and data encryption, ensuring that sensitive information remains protected.

Furthermore, the MFX-3050 is designed with environmental considerations in mind. It is ENERGY STAR certified, showcasing its efficiency and commitment to reducing energy consumption without compromising performance.

In summary, the Muratec MFX-3050 is a reliable multifunction printer that combines speed, quality, and security in one compact unit. Whether for printing, copying, scanning, or faxing, it offers a robust solution tailored for the dynamic needs of today's business environment. With its advanced features and user-centric design, the MFX-3050 is an excellent investment for any organization seeking to enhance their productivity and efficiency.
Top Page Image Contents