Muratec MFX-3050 manual Copying problems, Curl, This option through Printer Settings Utility or

Page 85

 

 

Condition

 

Suggested solutions

 

 

 

 

 

 

Horizontal stripes

If horizontally aligned black streaks or smears

 

 

 

 

 

appear:

 

 

AaBbCc

 

 

•

The toner cartridge may be installed

 

 

AaBbCc

 

 

 

improperly. Remove the cartridge and reinsert

 

 

AaBbCc

 

 

 

it.

 

 

 

 

•

The toner cartridge may be defective. Remove

 

 

AaBbCc

 

 

 

the toner cartridge and install a new one. See

 

 

AaBbCc

 

 

 

page 13.5.

 

 

 

 

 

•

If the problem persists, the machine may

 

 

 

 

 

 

require repair. Contact a service

 

 

 

 

 

 

 

 

 

 

 

 

representative.

 

 

 

 

 

 

Curl

If the printed paper is curled or paper does not

 

 

 

 

 

feed into the machine:

 

 

 

 

 

•

Turn over the stack of paper in the tray. Also

 

 

 

 

 

 

try rotating the paper 180° in the tray.

 

 

 

 

 

•

Try printing to the rear cover.

An unknown image

Your printer is probably being used at an altitude

repetitively appears

of 2,500 m (8,200 ft) or above.

on a next few

The high altitude may affect the print quality

sheets or loose

such as loose toner or light imaging. You can set

toner, light print, or

this option through Printer Settings Utility or

contamination

Printer tab in printer driver's properties. Refer to

occurs.

the Software Section for details.

Copying problems

Condition

 

Suggested solutions

 

 

Copies are too light

Use Darkness to darken or lighten the

or too dark.

background of the copies.

 

 

 

Smears, lines,

•

If defects are on the original, press Darkness

marks, or spots

 

to lighten the background of your copies.

appears on copies.

•

If no defects are on the original, clean the scan

 

 

unit. See page 13.3.

 

 

 

Copy image is

•

Ensure that the original is face down on the

skewed.

 

scanner glass or face up in the ADF.

 

•

Check that the copy paper is loaded correctly.

 

 

Blank copies print

Ensure that the original is face down on the

out.

scanner glass or face up in the ADF.

 

 

 

Image rubs off the

•

Replace the paper in the tray with paper from a

copy easily.

 

new package.

 

•

In high humidity areas, do not leave paper in

 

 

the machine for extended periods of time.

 

 

 

Frequent copy

•

Fan the stack of paper, then turn it over in the

paper jams occur.

 

tray. Replace the paper in the tray with a fresh

 

 

supply. Check/adjust the paper guides, if

 

 

necessary.

 

•

Ensure that the paper is the proper paper

 

 

weight. 75 g/m2 bond paper is recommended.

 

•

Check for copy paper or pieces of copy paper

 

 

remaining in the machine after a paper jam has

 

 

been cleared.

 

 

 

Toner cartridge

•

Your originals may contain pictures, solids, or

produces fewer

 

heavy lines. For example, your originals may

copies than

 

be forms, newsletters, books, or other

expected before

 

documents that use more toner.

running out of

•

The machine may be turned on and off

toner.

 

frequently.

 

•

The scanner lid may be left open while copies

 

 

are being made.

 

 

 

14.15 <Troubleshooting>

Page 84 Page 86
Image 85
Page 84 Page 86
Contents Page Page Contents Using USB flash memory Fax setupOrdering supplies and accessories Basic printingTroubleshooting MaintenanceInstalling accessories SpecificationsImportant Precautions and Safety Information FCC Information to the User Canadian Radio Interference RegulationsYou should also know that Approvals and CertificationsLimited warranty Page Introduction Special featuresFront view Rear view Printer overviewMFX-3050 Control panel overviewOn Hook Dial Engages the telephone line OK Confirms the selection on the screen Start Starts a jobFinding more information Understanding the Status LEDClearance space Selecting a locationCopy Setup Scan Feature System setupNetwork System Setup Scan Setup Menu overviewChanging the default mode Setting the date and timeChanging the clock mode Changing the display languageEntering characters using the number keypad Setting soundsSetting print job timeout Using the save modesSupplied software Software overviewPostScript Feature Printer driver featuresSystem requirements WindowsMacintosh LinuxRequirements Configuring TCP/IP Network setupVia network administration programs Supported operating systemsConfiguring IPX frame types Configuring EtherTalkDynamic addressing BOOTP/DHCP Static addressingRestoring the network configuration Setting Ethernet speedPrinting a network configuration Loading originals Loading originals and print mediaOn the scanner glass ADFSelecting print media Supported print media types and sizes Type Size Dimensions Weight1 Capacity2Guidelines for selecting and storing print media Media sizes supported in each modeGuidelines for special print media Tray Loading paperChanging the size of the paper in the paper tray Loading paper in the tray 1 or optional trayLoad the paper with the side to be printed on facing up Multi-purpose traySelecting an output location Setting the paper size and typePrinting to the output tray Printing to the rear cover Copying Changing the settings for each copySelecting the paper tray DarknessUsing special copy features Changing the default copy settingsReduced or enlarged copy CollationPoster copying ID card copyingPlace Front Side and PressStart appears on the display Copying on both sides of paper Setting copy timeoutClone copying Erasing background imagesBasic printing Canceling a print jobPrinting a document Double-click the Samsung SCX-5x30 Series iconScanning Scanning to an application using a local ConnectionScanning basics Press Scan/EmailPreparing for network scanning Scanning using a network connectionClick Machine Settings and SMB Setup Click Server List Setting up an SMB serverScanning to a network client ScanningScanning to Email Setting network scan timeoutScanning to an FTP server Changing the default scan settings Changing the settings for each scan jobSetting up Address Book Scanning to an SMB serverUsing Address Book entries Configuring group email numbersSearching Address Book for an entry Printing Address BookAdjusting the document settings Setting the fax headerResolution Press ResolutionSending a fax manually Sending a fax automaticallyAutomatic redialing Confirming a transmissionRedialing the last number Changing receiving modesReceiving manually in Tel mode Receiving automatically in Fax modeReceiving manually using an extension Telephone Receiving automatically in Ans/Fax modeActivating secure receiving mode Receiving in secure receiving modeDeactivating secure receiving mode Receiving faxes in memorySending a fax to multiple destinations Printing received faxes on both sides of paperPress Fax Down on the scanner glassAdding pages to a delayed fax Sending a delayed faxCanceling a delayed fax Sending a priority faxForwarding sent faxes to another fax machine Forwarding faxesForwarding sent faxes to email address Forwarding received faxes to another fax machineChanging the fax setup options Fax setupSending options Receiving optionsSetting up Phone Book Changing the default document settingsPrinting sent fax report automatically Speed buttonsGroup dial numbers Speed dial numbersDeleting a Phone Book entry Searching Phone Book for an entryPrinting Phone Book About USB memory Using USB flash memoryPlugging in a USB memory device Scanning to a USB memory deviceCustomizing Scan to USB Printing from a USB memory deviceManaging USB memory Backing up dataViewing the USB memory status Formatting a USB memory deviceAccessories Ordering supplies and accessoriesAccessory Description Part number Toner cartridgesPrinting reports MaintenancePrinting a report Other available reportsCleaning the outside Cleaning your machineCleaning the inside Clearing memoryMaintaining the toner cartridge Cleaning the scan unitToner cartridge storage Expected cartridge life Redistributing tonerReplacing the toner cartridge Cleaning the drumPrinting continuously when the Toner Empty message appears Maintenance PartsSending new toner notification Clearing the Toner Empty Replace Toner messageReplacing the ADF rubber pad Checking replaceablesManaging your machine from the web To access SyncThru Web ServiceChecking the machine’s serial number Clearing document jams TroubleshootingRoller misfeed Clearing paper jamsFuser area or around the toner cartridge Optional tray Multi-purpose trayPaper exit area Duplex Jam Duplex unit areaTips for avoiding paper jams Understanding display messages Line Error Message Meaning Suggested solutions Invalid ServerLow Heat Error Cycle PowerSelf Diagnostic Message Meaning Suggested solutions Retry Redial?Temperature Send ErrorToner cartridge-related messages Paper feeding problems Solving other problemsPrinting problems Spool Settings button Settings and then PrintersSCX-5x30 Series PCL Properties, click the DetailsPrinting quality problems Misformed Condition Suggested solutions Wrinkles or creasesCharacters Back of printoutsThis option through Printer Settings Utility or Copying problemsCurl Software Section for detailsScanning problems Fax problems Network Scan problemsCommon PostScript problems Common Windows problemsProblem Possible Cause Solution Installable Options sectionProblem Possible Cause and Solution Common Linux problemsProblem Suggested solutions Common Macintosh problemsPrecautions when installing accessories Installing accessoriesInstalling a memory Dimm Disconnect the power cordSelect the Samsung SCX-5x30 Series PS printer Activating the added memory in the PS printer propertiesGeneral specifications SpecificationsPrinter specifications Facsimile specifications Scanner and copier specificationsNumerics IndexSystem requirements Macintosh Software section Contents Using Windows Postscript Driver Using Your Printer in Linux Installing Software for Local Printing Installing Printer SoftwareTypical Installation Select Typical installation for a local printer. Click NextCustom Installation Select the components to be installed and click Next Select Custom installation. Click NextInstalling Software for Network Printing Custom Installation Installing Printer Software in Windows Select the components you want to reinstall and click Next Reinstalling Printer SoftwareNext Removing Printer SoftwarePrinting to a file PRN Printing a DocumentSelect your printer driver from the Name drop-down list Layout Tab Printer SettingsPaper Orientation Source Paper TabScaling Printing Resolution Image ModeToner Save Mode Graphics TabAbout Tab Extras TabPrinter Tab Using Help Using a Favorite SettingPrinting Multiple Pages on One Sheet of Paper N-Up Printing Advanced PrintingPrinting Booklets Printing PostersPrinting a Reduced or Enlarged Document Printing on Both Sides of PaperFitting Your Document to a Selected Paper Size NoneUsing an Existing Watermark Using WatermarksCreating a Watermark Editing a WatermarkWhat is an Overlay? Using OverlaysUsing a Page Overlay Creating a New Page OverlayAdvanced Using Windows PostScript DriverOverview Direct Print Utility Using Direct Print UtilitySetting Up a Client Computer Setting Up a Host ComputerCheck the Share this printer box Select Local Port and click New PortPrinter Setting Troubleshooting GuideUnderstanding Smart Panel Toner LevelUsing Printer Settings Utility Opening the Troubleshooting GuideChanging the Smart Panel Program Settings Using Onscreen Help FileUninstalling SmarThru Scanning Using SmarThruUsing SmarThru Scanning Using the WIA Driver Scanning Process with TWAIN- enabled SoftwareSettings Installing the Unified Linux Driver Installing the Unified Linux DriverGetting Started Click Uninstall Uninstalling the Unified Linux DriverPrinters Configuration Using the Unified Driver ConfiguratorOpening the Unified Driver Configurator Printers TabPorts Configuration Scanners ConfigurationClasses Tab Sharing Ports Between Printers and ScannersPrinting from Applications Configuring Printer Properties Printing a DocumentPrinting Files Scanning a DocumentClick Properties Adding Job Type Settings Using the Image ManagerTools Function Installing Software for Macintosh 10Using Your Printer with a MacintoshInstall the Scan driver Setting Up the PrinterUninstalling the Scan driver For a Network-connected MacintoshLayout Setting Changing Printer SettingsPrinting Printing a DocumentResolutionQuality Printer Features SettingPrinting Multiple Pages on One Sheet of Paper Fit toDuplex Printing ScanningIndex Rev.1.05
Related manuals
Manual 2 pages 7.5 Kb

MFX-3050 specifications

The Muratec MFX-3050 is a multifunctional printer designed to meet the demands of modern workplaces with its versatile features and advanced technology. This compact and robust device excels in delivering printing, copying, scanning, and faxing capabilities, making it an ideal solution for small to medium-sized businesses.

One of the standout characteristics of the MFX-3050 is its impressive print speed. Capable of producing up to 30 pages per minute, it ensures that users can efficiently complete their printing tasks without unnecessary delays. This speed is complemented by its first-page-out time, which is remarkably quick, allowing users to receive their documents almost instantly.

In terms of print quality, the MFX-3050 does not disappoint. With a maximum print resolution of 1200 dpi, it provides sharp and vibrant documents, suitable for both text and graphics. This high-quality output is essential for professionals who need to make a strong impression with their documentation.

The device features a user-friendly interface, equipped with a color touchscreen display that simplifies operation. Users can easily navigate through various functions, adjust settings, and monitor job status, enhancing overall productivity. The MFX-3050 also offers a range of connectivity options, including USB, Ethernet, and Wi-Fi, allowing seamless integration into any office network.

Another significant advantage of the MFX-3050 is its scanning capabilities. With the ability to scan at 600 dpi and a robust automatic document feeder, users can quickly digitize multi-page documents. The device supports various file formats, making it easy to share scanned files across different platforms.

Security is a crucial consideration for any office environment, and the MFX-3050 addresses this concern with built-in security features. These include secure print, user authentication, and data encryption, ensuring that sensitive information remains protected.

Furthermore, the MFX-3050 is designed with environmental considerations in mind. It is ENERGY STAR certified, showcasing its efficiency and commitment to reducing energy consumption without compromising performance.

In summary, the Muratec MFX-3050 is a reliable multifunction printer that combines speed, quality, and security in one compact unit. Whether for printing, copying, scanning, or faxing, it offers a robust solution tailored for the dynamic needs of today's business environment. With its advanced features and user-centric design, the MFX-3050 is an excellent investment for any organization seeking to enhance their productivity and efficiency.
Top Page Image Contents