Muratec MFX-3050 manual Searching Phone Book for an entry, Deleting a Phone Book entry

Page 57

8When you have finished, press the Scroll buttons to select No at the Another No.? prompt and press OK.

9Press Stop/Clear to return to Standby mode.

Editing a group dial number

You can delete a specific entry from a group or add a new number to the selected group.

1Press Address Book until New&Edit appears on the bottom line of the display and press OK.

2Press the Scroll buttons until Group Dial appears and press OK.

3Enter the group dial number you want to edit and press OK.

4Enter the speed dial number you want to add or delete and press OK.

If you entered a new speed dial number, Add? appears.

If you enter a speed dial number stored in the group, Delete? appears.

5Press OK to add or delete the number.

6Press OK when Yes appears to add or delete more numbers and repeat from step 4.

7When you have finished, press the Scroll buttons to select No at the Another No.? prompt and press OK.

8Press Stop/Clear to return to Standby mode.

Using group dial numbers

To use a group dial entry, you need to search for and select it from memory.

When you are prompted to enter a fax number while sending a fax, press Address Book. See below.

Searching Phone Book for an entry

There are two ways to search for a number in memory. You can either scan from A to Z sequentially, or you can search by entering the first letters of the name associated with the number.

Searching sequentially through the memory

1If necessary, press Fax.

2Press Address Book until Search&Dial appears on the bottom line of the display and press OK.

3Press the Scroll buttons until the number category you want appears and press OK.

4Press OK when All appears.

5Press the Scroll buttons until the name and number you want appears. You can search upwards or downwards through the entire memory in alphabetical order.

Searching with a particular first letter

1If necessary, press Fax.

2Press Address Book until Search&Dial appears on the bottom line of the display and press OK.

3Press the Scroll buttons until the number category you want appears and press OK.

4Press the Scroll buttons until ID appears and press OK.

5Enter the first few letters of the name you want and press OK.

6Press the Scroll buttons until the name you want appears and press OK.

Deleting a Phone Book entry

You can delete entries in Phone Book one by one.

1Press Address Book until Delete appears on the bottom line of the display and press OK.

2Press the Scroll buttons until the number category you want appears and press OK.

3Press the Scroll buttons until the searching method you want appears and press OK.

Select Search All to search for an entry by scanning through all entries in Phone Book.

Select Search ID to search for an entry by the first few letters of the name.

4Press the Scroll buttons until the name you want appears and press OK.

Or, enter the first letters and press OK. Press the Scroll buttons until the name you want appears and press OK.

5Press OK.

6Press OK when Yes appears to confirm the deletion.

7Press Stop/Clear to return to Standby mode.

Printing Phone Book

You can check your Phone Book settings by printing a list.

1Press Address Book until Print appears on the bottom line of the display.

2Press OK. A list showing your speed button settings, and speed dial and group dial entries prints out.

10.4 <Fax setup>

Page 56 Page 58
Image 57
Page 56 Page 58
Contents Page Page Contents Using USB flash memory Fax setupOrdering supplies and accessories Basic printingTroubleshooting MaintenanceInstalling accessories SpecificationsImportant Precautions and Safety Information FCC Information to the User Canadian Radio Interference RegulationsYou should also know that Approvals and CertificationsLimited warranty Page Introduction Special featuresFront view Rear view Printer overviewMFX-3050 Control panel overviewOn Hook Dial Engages the telephone line OK Confirms the selection on the screen Start Starts a jobFinding more information Understanding the Status LEDClearance space Selecting a locationCopy Setup Scan Feature System setupNetwork System Setup Scan Setup Menu overviewChanging the default mode Setting the date and timeChanging the clock mode Changing the display languageEntering characters using the number keypad Setting soundsSetting print job timeout Using the save modesSupplied software Software overviewPostScript Feature Printer driver featuresSystem requirements WindowsLinux MacintoshRequirements Configuring TCP/IP Network setupVia network administration programs Supported operating systemsConfiguring IPX frame types Configuring EtherTalkDynamic addressing BOOTP/DHCP Static addressingSetting Ethernet speed Restoring the network configurationPrinting a network configuration Loading originals Loading originals and print mediaOn the scanner glass ADFSelecting print media Supported print media types and sizes Type Size Dimensions Weight1 Capacity2Media sizes supported in each mode Guidelines for selecting and storing print mediaGuidelines for special print media Tray Loading paperChanging the size of the paper in the paper tray Loading paper in the tray 1 or optional trayLoad the paper with the side to be printed on facing up Multi-purpose traySetting the paper size and type Selecting an output locationPrinting to the output tray Printing to the rear cover Copying Changing the settings for each copySelecting the paper tray DarknessUsing special copy features Changing the default copy settingsReduced or enlarged copy CollationID card copying Poster copyingPlace Front Side and PressStart appears on the display Copying on both sides of paper Setting copy timeoutClone copying Erasing background imagesBasic printing Canceling a print jobPrinting a document Double-click the Samsung SCX-5x30 Series iconScanning Scanning to an application using a local ConnectionScanning basics Press Scan/EmailPreparing for network scanning Scanning using a network connectionClick Machine Settings and SMB Setup Click Server List Setting up an SMB serverScanning to a network client ScanningSetting network scan timeout Scanning to EmailScanning to an FTP server Changing the default scan settings Changing the settings for each scan jobSetting up Address Book Scanning to an SMB serverUsing Address Book entries Configuring group email numbersSearching Address Book for an entry Printing Address BookAdjusting the document settings Setting the fax headerResolution Press ResolutionSending a fax manually Sending a fax automaticallyAutomatic redialing Confirming a transmissionRedialing the last number Changing receiving modesReceiving manually in Tel mode Receiving automatically in Fax modeReceiving manually using an extension Telephone Receiving automatically in Ans/Fax modeActivating secure receiving mode Receiving in secure receiving modeDeactivating secure receiving mode Receiving faxes in memorySending a fax to multiple destinations Printing received faxes on both sides of paperPress Fax Down on the scanner glassAdding pages to a delayed fax Sending a delayed faxCanceling a delayed fax Sending a priority faxForwarding sent faxes to another fax machine Forwarding faxesForwarding sent faxes to email address Forwarding received faxes to another fax machineChanging the fax setup options Fax setupSending options Receiving optionsSetting up Phone Book Changing the default document settingsPrinting sent fax report automatically Speed buttonsGroup dial numbers Speed dial numbersSearching Phone Book for an entry Deleting a Phone Book entryPrinting Phone Book About USB memory Using USB flash memoryPlugging in a USB memory device Scanning to a USB memory deviceCustomizing Scan to USB Printing from a USB memory deviceManaging USB memory Backing up dataViewing the USB memory status Formatting a USB memory deviceAccessories Ordering supplies and accessoriesAccessory Description Part number Toner cartridgesPrinting reports MaintenancePrinting a report Other available reportsCleaning the outside Cleaning your machineCleaning the inside Clearing memoryCleaning the scan unit Maintaining the toner cartridgeToner cartridge storage Expected cartridge life Redistributing tonerReplacing the toner cartridge Cleaning the drumPrinting continuously when the Toner Empty message appears Maintenance PartsSending new toner notification Clearing the Toner Empty Replace Toner messageReplacing the ADF rubber pad Checking replaceablesTo access SyncThru Web Service Managing your machine from the webChecking the machine’s serial number Clearing document jams TroubleshootingRoller misfeed Clearing paper jamsFuser area or around the toner cartridge Optional tray Multi-purpose trayPaper exit area Duplex Jam Duplex unit areaTips for avoiding paper jams Understanding display messages Line Error Message Meaning Suggested solutions Invalid ServerLow Heat Error Cycle PowerSelf Diagnostic Message Meaning Suggested solutions Retry Redial?Temperature Send ErrorToner cartridge-related messages Solving other problems Paper feeding problemsPrinting problems Spool Settings button Settings and then PrintersSCX-5x30 Series PCL Properties, click the DetailsPrinting quality problems Misformed Condition Suggested solutions Wrinkles or creasesCharacters Back of printoutsThis option through Printer Settings Utility or Copying problemsCurl Software Section for detailsScanning problems Fax problems Network Scan problemsCommon PostScript problems Common Windows problemsProblem Possible Cause Solution Installable Options sectionProblem Possible Cause and Solution Common Linux problemsProblem Suggested solutions Common Macintosh problemsPrecautions when installing accessories Installing accessoriesInstalling a memory Dimm Disconnect the power cordSelect the Samsung SCX-5x30 Series PS printer Activating the added memory in the PS printer propertiesSpecifications General specificationsPrinter specifications Facsimile specifications Scanner and copier specificationsNumerics IndexSystem requirements Macintosh Software section Contents Using Windows Postscript Driver Using Your Printer in Linux Installing Software for Local Printing Installing Printer SoftwareTypical Installation Select Typical installation for a local printer. Click NextCustom Installation Select the components to be installed and click Next Select Custom installation. Click NextInstalling Software for Network Printing Custom Installation Installing Printer Software in Windows Select the components you want to reinstall and click Next Reinstalling Printer SoftwareNext Removing Printer SoftwarePrinting a Document Printing to a file PRNSelect your printer driver from the Name drop-down list Printer Settings Layout TabPaper Orientation Paper Tab SourceScaling Printing Resolution Image ModeToner Save Mode Graphics TabExtras Tab About TabPrinter Tab Using Help Using a Favorite SettingPrinting Multiple Pages on One Sheet of Paper N-Up Printing Advanced PrintingPrinting Booklets Printing PostersPrinting a Reduced or Enlarged Document Printing on Both Sides of PaperFitting Your Document to a Selected Paper Size NoneUsing an Existing Watermark Using WatermarksCreating a Watermark Editing a WatermarkWhat is an Overlay? Using OverlaysUsing a Page Overlay Creating a New Page OverlayAdvanced Using Windows PostScript DriverOverview Direct Print Utility Using Direct Print UtilitySetting Up a Client Computer Setting Up a Host ComputerCheck the Share this printer box Select Local Port and click New PortPrinter Setting Troubleshooting GuideUnderstanding Smart Panel Toner LevelUsing Printer Settings Utility Opening the Troubleshooting GuideChanging the Smart Panel Program Settings Using Onscreen Help FileUninstalling SmarThru Scanning Using SmarThruUsing SmarThru Scanning Process with TWAIN- enabled Software Scanning Using the WIA DriverSettings Installing the Unified Linux Driver Installing the Unified Linux DriverGetting Started Click Uninstall Uninstalling the Unified Linux DriverPrinters Configuration Using the Unified Driver ConfiguratorOpening the Unified Driver Configurator Printers TabPorts Configuration Scanners ConfigurationClasses Tab Sharing Ports Between Printers and ScannersPrinting from Applications Configuring Printer Properties Printing a DocumentScanning a Document Printing FilesClick Properties Adding Job Type Settings Using the Image ManagerTools Function Installing Software for Macintosh 10Using Your Printer with a MacintoshInstall the Scan driver Setting Up the PrinterUninstalling the Scan driver For a Network-connected MacintoshLayout Setting Changing Printer SettingsPrinting Printing a DocumentResolutionQuality Printer Features SettingPrinting Multiple Pages on One Sheet of Paper Fit toDuplex Printing ScanningIndex Rev.1.05
Related manuals
Manual 2 pages 7.5 Kb

MFX-3050 specifications

The Muratec MFX-3050 is a multifunctional printer designed to meet the demands of modern workplaces with its versatile features and advanced technology. This compact and robust device excels in delivering printing, copying, scanning, and faxing capabilities, making it an ideal solution for small to medium-sized businesses.

One of the standout characteristics of the MFX-3050 is its impressive print speed. Capable of producing up to 30 pages per minute, it ensures that users can efficiently complete their printing tasks without unnecessary delays. This speed is complemented by its first-page-out time, which is remarkably quick, allowing users to receive their documents almost instantly.

In terms of print quality, the MFX-3050 does not disappoint. With a maximum print resolution of 1200 dpi, it provides sharp and vibrant documents, suitable for both text and graphics. This high-quality output is essential for professionals who need to make a strong impression with their documentation.

The device features a user-friendly interface, equipped with a color touchscreen display that simplifies operation. Users can easily navigate through various functions, adjust settings, and monitor job status, enhancing overall productivity. The MFX-3050 also offers a range of connectivity options, including USB, Ethernet, and Wi-Fi, allowing seamless integration into any office network.

Another significant advantage of the MFX-3050 is its scanning capabilities. With the ability to scan at 600 dpi and a robust automatic document feeder, users can quickly digitize multi-page documents. The device supports various file formats, making it easy to share scanned files across different platforms.

Security is a crucial consideration for any office environment, and the MFX-3050 addresses this concern with built-in security features. These include secure print, user authentication, and data encryption, ensuring that sensitive information remains protected.

Furthermore, the MFX-3050 is designed with environmental considerations in mind. It is ENERGY STAR certified, showcasing its efficiency and commitment to reducing energy consumption without compromising performance.

In summary, the Muratec MFX-3050 is a reliable multifunction printer that combines speed, quality, and security in one compact unit. Whether for printing, copying, scanning, or faxing, it offers a robust solution tailored for the dynamic needs of today's business environment. With its advanced features and user-centric design, the MFX-3050 is an excellent investment for any organization seeking to enhance their productivity and efficiency.
Top Page Image Contents