Muratec MFX-3050 manual Maintenance Parts, Sending new toner notification, Items Yield Average

Page 68

Sending new toner notification

You can set your machine to automatically send a fax to your Muratec dealer to notify them that your machine requires a new toner cartridge when the toner cartridge needs to be replaced. The fax number needs to be set by your dealer prior to using this feature, otherwise the machine cannot send a notification even though you turn this service on.

1Press Menu until System Setup appears on the bottom line of the display and press OK.

2Press the Scroll buttons until Maintenance appears and press OK.

3Press the Scroll buttons until Remote Service appears and press OK.

4Enter a password and press OK.

5Re-enter the password and press OK.

6Press the Scroll buttons to select On and press OK.

7Press Stop/Clear to return to Standby mode.

Once this feature has been enabled, you need to enter the password each time you disable or enable it.

Printing continuously when the Toner Empty message appears

When the toner cartridge is nearing empty, the machine shows the Toner Empty message and stops printing. You can set the machine to disregard this message when it appears and to continue printing, even though print quality is not optimal.

1Press Menu until System Setup appears on the bottom line of the display and press OK.

2Press the Scroll buttons until Maintenance appears and press OK.

3Press the Scroll buttons until Ignore Toner appears and press OK.

4Press the Scroll buttons until the desired status appears and press OK.

If you select off, the received fax cannot be printed until you install a new toner cartridge. However, faxes can be received into memory as long as it allows

5Press Stop/Clear to return to Standby mode.

Clearing the Toner Empty Replace Toner message

When the Toner Empty Replace Toner message appears you can configure not to see this message again not to disturb you.

1Press Menu until System Setup appears on the bottom line of the display and press OK.

2Press the Scroll buttons until Maintenance appears and press OK.

3Press the Scroll buttons until CLR Empty Msg. appears and press OK.

4Select On and press OK.

5Now the Toner Empty Replace Toner message does not appear but the Replace Toner message will remain for reminding you that the new cartridge needs to be installed for quality.

Caution

Once you have selected On, this setting will be permanently written to the memory of the toner cartridge, and this menu will be disappeared from the Maintenance menu.

Maintenance Parts

To avoid print quality and paper feed problems resulting from worn parts and to maintain your printer in top working condition the following items will need to be replaced at the specified number of pages or when the life span of each item has expired.

Items

Yield (Average)

 

 

ADF rubber pad

Approx. 20,000 pages

 

 

Transfer roller

Approx. 70,000 pages

 

 

Fuser unit

Approx. 80,000 pages

 

 

Tray rubber pad

Approx. 250,000 pages

 

 

Pickup roller

Approx. 150,000 pages

 

 

Muratec highly recommends that an authorized Muratec dealer perform this maintenance.

13.6 <Maintenance>

Page 67 Page 69
Image 68
Page 67 Page 69
Contents Page Page Contents Fax setup Using USB flash memoryOrdering supplies and accessories Basic printingMaintenance TroubleshootingInstalling accessories SpecificationsImportant Precautions and Safety Information Canadian Radio Interference Regulations FCC Information to the UserApprovals and Certifications You should also know thatLimited warranty Page Special features IntroductionPrinter overview Front view Rear viewControl panel overview MFX-3050On Hook Dial Engages the telephone line OK Confirms the selection on the screen Start Starts a jobUnderstanding the Status LED Finding more informationSelecting a location Clearance spaceSystem setup Copy Setup Scan FeatureNetwork System Setup Scan Setup Menu overviewSetting the date and time Changing the default modeChanging the clock mode Changing the display languageSetting sounds Entering characters using the number keypadUsing the save modes Setting print job timeoutSoftware overview Supplied softwarePrinter driver features PostScript FeatureSystem requirements WindowsRequirements LinuxMacintosh Network setup Configuring TCP/IPVia network administration programs Supported operating systemsConfiguring EtherTalk Configuring IPX frame typesDynamic addressing BOOTP/DHCP Static addressingPrinting a network configuration Setting Ethernet speedRestoring the network configuration Loading originals and print media Loading originalsOn the scanner glass ADFSelecting print media Type Size Dimensions Weight1 Capacity2 Supported print media types and sizesGuidelines for special print media Media sizes supported in each modeGuidelines for selecting and storing print media Loading paper TrayLoading paper in the tray 1 or optional tray Changing the size of the paper in the paper trayMulti-purpose tray Load the paper with the side to be printed on facing upPrinting to the output tray Setting the paper size and typeSelecting an output location Printing to the rear cover Changing the settings for each copy CopyingSelecting the paper tray DarknessChanging the default copy settings Using special copy featuresReduced or enlarged copy CollationPlace Front Side and PressStart appears on the display ID card copyingPoster copying Setting copy timeout Copying on both sides of paperClone copying Erasing background imagesCanceling a print job Basic printingPrinting a document Double-click the Samsung SCX-5x30 Series iconScanning to an application using a local Connection ScanningScanning basics Press Scan/EmailScanning using a network connection Preparing for network scanningSetting up an SMB server Click Machine Settings and SMB Setup Click Server ListScanning to a network client ScanningScanning to an FTP server Setting network scan timeoutScanning to Email Changing the settings for each scan job Changing the default scan settingsSetting up Address Book Scanning to an SMB serverConfiguring group email numbers Using Address Book entriesSearching Address Book for an entry Printing Address BookSetting the fax header Adjusting the document settingsResolution Press ResolutionSending a fax automatically Sending a fax manuallyConfirming a transmission Automatic redialingRedialing the last number Changing receiving modesReceiving automatically in Fax mode Receiving manually in Tel modeReceiving manually using an extension Telephone Receiving automatically in Ans/Fax modeReceiving in secure receiving mode Activating secure receiving modeDeactivating secure receiving mode Receiving faxes in memoryPrinting received faxes on both sides of paper Sending a fax to multiple destinationsPress Fax Down on the scanner glassSending a delayed fax Adding pages to a delayed faxCanceling a delayed fax Sending a priority faxForwarding faxes Forwarding sent faxes to another fax machineForwarding sent faxes to email address Forwarding received faxes to another fax machineFax setup Changing the fax setup optionsSending options Receiving optionsChanging the default document settings Setting up Phone BookPrinting sent fax report automatically Speed buttonsSpeed dial numbers Group dial numbersPrinting Phone Book Searching Phone Book for an entryDeleting a Phone Book entry Using USB flash memory About USB memoryPlugging in a USB memory device Scanning to a USB memory devicePrinting from a USB memory device Customizing Scan to USBBacking up data Managing USB memoryFormatting a USB memory device Viewing the USB memory statusOrdering supplies and accessories AccessoriesAccessory Description Part number Toner cartridgesMaintenance Printing reportsPrinting a report Other available reportsCleaning your machine Cleaning the outsideCleaning the inside Clearing memoryToner cartridge storage Cleaning the scan unitMaintaining the toner cartridge Redistributing toner Expected cartridge lifeCleaning the drum Replacing the toner cartridgeMaintenance Parts Printing continuously when the Toner Empty message appearsSending new toner notification Clearing the Toner Empty Replace Toner messageChecking replaceables Replacing the ADF rubber padChecking the machine’s serial number To access SyncThru Web ServiceManaging your machine from the web Troubleshooting Clearing document jamsClearing paper jams Roller misfeedOptional tray Multi-purpose tray Fuser area or around the toner cartridgePaper exit area Duplex unit area Duplex JamTips for avoiding paper jams Understanding display messages Message Meaning Suggested solutions Invalid Server Line ErrorLow Heat Error Cycle PowerMessage Meaning Suggested solutions Retry Redial? Self DiagnosticTemperature Send ErrorToner cartridge-related messages Printing problems Solving other problemsPaper feeding problems Settings and then Printers Spool Settings buttonSCX-5x30 Series PCL Properties, click the DetailsPrinting quality problems Condition Suggested solutions Wrinkles or creases MisformedCharacters Back of printoutsCopying problems This option through Printer Settings Utility orCurl Software Section for detailsScanning problems Network Scan problems Fax problemsCommon Windows problems Common PostScript problemsProblem Possible Cause Solution Installable Options sectionCommon Linux problems Problem Possible Cause and SolutionCommon Macintosh problems Problem Suggested solutionsInstalling accessories Precautions when installing accessoriesInstalling a memory Dimm Disconnect the power cordActivating the added memory in the PS printer properties Select the Samsung SCX-5x30 Series PS printerPrinter specifications SpecificationsGeneral specifications Scanner and copier specifications Facsimile specificationsIndex NumericsSystem requirements Macintosh Software section Contents Using Windows Postscript Driver Using Your Printer in Linux Installing Printer Software Installing Software for Local PrintingTypical Installation Select Typical installation for a local printer. Click NextCustom Installation Select Custom installation. Click Next Select the components to be installed and click NextInstalling Software for Network Printing Custom Installation Installing Printer Software in Windows Reinstalling Printer Software Select the components you want to reinstall and click NextRemoving Printer Software NextSelect your printer driver from the Name drop-down list Printing a DocumentPrinting to a file PRN Paper Orientation Printer SettingsLayout Tab Scaling Printing Paper TabSource Image Mode ResolutionToner Save Mode Graphics TabPrinter Tab Extras TabAbout Tab Using a Favorite Setting Using HelpAdvanced Printing Printing Multiple Pages on One Sheet of Paper N-Up PrintingPrinting Posters Printing BookletsPrinting on Both Sides of Paper Printing a Reduced or Enlarged DocumentFitting Your Document to a Selected Paper Size NoneUsing Watermarks Using an Existing WatermarkCreating a Watermark Editing a WatermarkUsing Overlays What is an Overlay?Using a Page Overlay Creating a New Page OverlayUsing Windows PostScript Driver AdvancedUsing Direct Print Utility Overview Direct Print UtilitySetting Up a Host Computer Setting Up a Client ComputerCheck the Share this printer box Select Local Port and click New PortTroubleshooting Guide Printer SettingUnderstanding Smart Panel Toner LevelOpening the Troubleshooting Guide Using Printer Settings UtilityChanging the Smart Panel Program Settings Using Onscreen Help FileScanning Using SmarThru Uninstalling SmarThruUsing SmarThru Settings Scanning Process with TWAIN- enabled SoftwareScanning Using the WIA Driver Getting Started Installing the Unified Linux DriverInstalling the Unified Linux Driver Uninstalling the Unified Linux Driver Click UninstallUsing the Unified Driver Configurator Printers ConfigurationOpening the Unified Driver Configurator Printers TabScanners Configuration Ports ConfigurationClasses Tab Sharing Ports Between Printers and ScannersConfiguring Printer Properties Printing a Document Printing from ApplicationsClick Properties Scanning a DocumentPrinting Files Using the Image Manager Adding Job Type SettingsTools Function 10Using Your Printer with a Macintosh Installing Software for MacintoshSetting Up the Printer Install the Scan driverUninstalling the Scan driver For a Network-connected MacintoshChanging Printer Settings Layout SettingPrinting Printing a DocumentPrinter Features Setting ResolutionQualityPrinting Multiple Pages on One Sheet of Paper Fit toScanning Duplex PrintingIndex Rev.1.05
Related manuals
Manual 2 pages 7.5 Kb

MFX-3050 specifications

The Muratec MFX-3050 is a multifunctional printer designed to meet the demands of modern workplaces with its versatile features and advanced technology. This compact and robust device excels in delivering printing, copying, scanning, and faxing capabilities, making it an ideal solution for small to medium-sized businesses.

One of the standout characteristics of the MFX-3050 is its impressive print speed. Capable of producing up to 30 pages per minute, it ensures that users can efficiently complete their printing tasks without unnecessary delays. This speed is complemented by its first-page-out time, which is remarkably quick, allowing users to receive their documents almost instantly.

In terms of print quality, the MFX-3050 does not disappoint. With a maximum print resolution of 1200 dpi, it provides sharp and vibrant documents, suitable for both text and graphics. This high-quality output is essential for professionals who need to make a strong impression with their documentation.

The device features a user-friendly interface, equipped with a color touchscreen display that simplifies operation. Users can easily navigate through various functions, adjust settings, and monitor job status, enhancing overall productivity. The MFX-3050 also offers a range of connectivity options, including USB, Ethernet, and Wi-Fi, allowing seamless integration into any office network.

Another significant advantage of the MFX-3050 is its scanning capabilities. With the ability to scan at 600 dpi and a robust automatic document feeder, users can quickly digitize multi-page documents. The device supports various file formats, making it easy to share scanned files across different platforms.

Security is a crucial consideration for any office environment, and the MFX-3050 addresses this concern with built-in security features. These include secure print, user authentication, and data encryption, ensuring that sensitive information remains protected.

Furthermore, the MFX-3050 is designed with environmental considerations in mind. It is ENERGY STAR certified, showcasing its efficiency and commitment to reducing energy consumption without compromising performance.

In summary, the Muratec MFX-3050 is a reliable multifunction printer that combines speed, quality, and security in one compact unit. Whether for printing, copying, scanning, or faxing, it offers a robust solution tailored for the dynamic needs of today's business environment. With its advanced features and user-centric design, the MFX-3050 is an excellent investment for any organization seeking to enhance their productivity and efficiency.
Top Page Image Contents