Monarch 9403TM manual W e r U p M o d e, Slashed Zero, Power UP

To change the setting, from the Main Menu select Setup, then Defaults. Then, follow these steps:

1.Press L or R until you see

DEFAULTS

l Slashed Zero r

2.Press E. You will see the current setting, for example:

SLASHED ZERO

lYes

3.Select the option you want. Then press E. Press e twice to exit to the Main Menu.

P o w e r - U p M o d e

Power-up mode lets you decide how your printer starts each time you turn it on. If you normally want the printer to be ready to start printing when it is turned on, use the Online power-up mode. If you normally want the operator to perform some other task first, use the Offline power-up mode.

To change the setting, from the Main Menu select Setup, then Defaults. Then, follow these steps:

1.Press L or R until you see

DEFAULTS

l Powerup Mode r

2.Press E. You will see the current setting, for example:

POWER UP

lOffline

7-6Setting Defaults