Monarch 9403TM manual

040	Line thickness must be 0 to 99 dots.
041	Line direction must be 0, 90, 180, or 270.
042	The line segment or box end row is defined outside of
	printable area.

043The line segment or box end column is defined outside of printable area.

044	Dot pattern for line or box must be "".
045	Line length is defined beyond the maximum length.
046	Line type must be S (segment) or V (vector).
051	Imaging mode in the graphic header must be 0.
101	Format referenced by batch not in memory.
102	Print quantity is outside the range 0 to 32000.
104	Batch mode must be N (new) or U (update).
105	Batch separator must be 0 (Off) or 1 (On) in the batch
	control field.
106	Print multiple is outside the range 1 to 999.
107	Cut multiple is outside the range 0 to 999.
108	Multiple part supply is outside the range 1 to 5.
109	Reserved for knife usage.

200Option number must be 1, 4, 30, 31, 42, 50, 60, or 61.

201Copy length is outside the range 0 to 2710.

202Copy start position must be 1 to 2710.

203Destination start position must be 1 to 2710.

Troubleshooting 11 - 5