314Check digit algorithm must be D (sum of digits) or P (sum of products).
325 Duplicating direction must be 0 or 1.
327Amount of row adjustment must be 0 to 999.
328Duplicate count must be 0 to 999.
340Bitmap line encoding must be H (Hex) or R (Run length).
350Font selector must be 1 to 9999.
351Font data length must be 68 to 16384.
352Insufficient font memory is available for the downloaded font.
380Job request is outside the range 0 to 4.
400Invalid character following {.
401Internal software failure. Call Technical Support.
402Field separator is not in the expected location.
403Field separator was not found.
404The number or string that is currently being processed is too long.
405Too many fields exist in the format.
C o m m u n i c a t i o n F a i l u r e s
Errors 410 to 413 are usually caused by a hardware failure, by an incorrect SETUP option or by the host ignoring flow control (XON/OFF, CTS/RTS or DTR). These errors occur when the printer cannot communicate with the host. Refer to the Packet Reference Manual or your System Administrator for more information.
Troubleshooting 11 - 9