E n t e r i n g S y m b o l s
You can use character codes to enter symbols. See Appendix B for a list of symbols and their corresponding character codes.
To enter a character code
1.Press P.
2.Use the data entry keys to enter the
3.Press E.
U s i n g B a r C o d e 1 2 8
You can enter function codes 1 - 4 for code 128 bar codes. These codes only function as code 128 data. They do not print if you enter them as data anywhere else. See the Code 128 table in Appendix B for the function code you want.
To enter a function code
1.Press P.
2.Use the data entry keys to enter the function code you want.
3.Press E.
E n t e r i n g a n d C h a n g i n g D a t a
When you need to enter data, the screen shows a prompt with an underscore for each character you can enter.
DEPT:
JUNIOR _ _ _
For example, this screen shows you can enter up to three characters before pressing E. If you try to enter more than three characters, the printer does not accept the data. Your entry is not accepted until you press E.
Printing