User Guide
Initializing And Registering The Phone
IP phone initialization occurs automatically when the set is connected to the network.
CAUTION: During the initialization process, the phone may download crucial "boot" data from the TFTP server on the network. This will be indicated by the display screen showing DO NOT POWER DOWN and the light indicator (LED) flashing. DO NOT POWER DOWN OR TURN OFF THE PHONE DURING THIS PROCESS! If the phone is powered down at this point, "boot" data is likely to be corrupted and the phone will not boot up properly when powered on.
All IP sets are required to complete PIN registration. This registration results in a MAC address being assigned in the MAC Address Assignment form. The 5005 IP phone will register with the 3100 ICP automatically.
Once the phone is registered, it can be moved to any switched 10/100baseT port that is reachable by the 3100 ICP, DHCP and TFTP servers servicing the IP phones so long as the phone is locally powered. The phone will automatically boot and
Note: Initializing and registering the 5005 IP phone is a procedure that should only be carried out either by a trained technician or your System Administrator. Please consult with your System Administrator before performing any procedures that may have an adverse effect on the performance of the phone.
Using The 5005 IP Phone
About Using The 5005 IP Phone
The 5005 IP Phone is a
Related Topics
Adjusting Volume Levels
Telephone Status Indicators
Adjusting Display Contrast
Programming The Function Keys
Desktop Stand
Mounting The Phone On The Wall
About Call Handling |
|
Telephone Status Indicators |
|
Situation: | The message waiting indicator is: |
Line is idle | Off |
Line is ringing | Flashing rapidly |
Message waiting/Voicemail | Flashing slowly |
- 4 -