Metrologic Instruments IS1000 manual Default Configuration factory setting

1.1.Default Configuration (factory setting)

When shipped from the factory, each IS1000 is configured with default parameter values as follows:

		Default Configuration
	RS232 mode:
	- 9600 bps
Communication Mode	-	Even parity
	-	7 data bits
	-	1 stop bit
	- CR/LF end of message characters
Symbology	Code 39, Code 128, EAN 128, UPC/EAN, Interleaved 2/5,
	Monarch/Codabar
Radio	433 MHz – Channel 3
	- Simple acknowledgment mode
Operating Mode	- Timer 1 = 200 ms
	- Timer 2 = 3 s
	- Timer 3 = 2 s
	- Number of re-transmissions = 3
Buzzer	High volume

These are the main parameters, please check the sections of this manual which concern your application.

The default value of each parameter appears like this:

3 to 5 characters

Code 39

FUNCTION X ACTIVATED *

The text below the code is framed and ended by the sign * to indicate the default value.

At any time, the default values of all the parameters can be set by scanning this code:

DEFAULT CONFIGURATION

!Caution:

The reading of this code will turn all parameters to their default value.

IS1000 – Configuration Guide 3