Metrologic Instruments IS1000 manual Types of Numeric Characters, Time-Out Between Characters

2.2.3.Types of Numeric Characters

This function allows the emulation of the numeric characters of the numeric pad or those located on top of the keyboard.

Use this function if trouble occurs with upper/lower case keyboard modes.

NUMERICS LOCATED

OVER THE ALPHANUMERIC PAD *

NUMERIC PAD

!Note:

If the option Numeric Pad is chosen, the numeric pad of the keyboard must be also turned on (or locked) for correct operation.

2.2.4.Time-Out Between Characters

The insertion of a time-out between each character can sometimes avoid eventual errors due to a fast transmission speed (specially on PS/2 or when DOS and BIOS are very busy).

0 ms *

10 ms

50 ms

5 ms

20 ms

100 ms

START OF CONFIGURATION	END OF CONFIGURATION
IS1000 – Configuration Guide	15