Metrologic Instruments IS1000 manual Symbology Selection

3.1.Symbology Selection

NEW SELECTION

This code must be read to initialize any new selection of symbologies

CODE 39 *

UPC/EAN *

CODE 128 *

INTERLEAVED 2/5 *

MONARCH/CODABAR *

EAN 128 *

These six bar code symbologies are the most commonly used and are active by default.

Other symbologies can be selected on the next page.

!Note:

•If no symbology is selected after the reading of New Selection code, the above six symbologies will remain activated.

•Only the symbologies selected after the reading of New Selection code will be activated

•If New Selection code is not read before selecting another symbology, this will be added to the six of above.

START OF CONFIGURATION	END OF CONFIGURATION
IS1000 – Configuration Guide	22